%
Front fender CUSTOM V2 (suitable for Harley-Davidson models: Touring from 2024) €377.10* €419.00*
Prod. no.: HD-TOU065
Inches: 21" | Productquality: perfect Cult-Werk quality | Surface: black glossy
The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2024 onwards for a sportier look. It is Shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €319.50*
%
Front fender CUSTOM V1 (suitable for Harley-Davidson models: Touring from 2024) €319.50* €355.00*
Prod. no.: HD-TOU059
Inches: 19" | Productquality: perfect Cult-Werk quality | Surface: black glossy
The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2024 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €287.10*
%
Front axle cover (suitable for Harley-Davidson models: Touring from 2024) €80.10* €89.00*
Prod. no.: HD-TOU052
Version: mit Fräsung, schwarz
These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2018 onwards (except Sport Glide) and cover the ends of the front axle on both sides of the front fork. The covers are inserted into the hollow axle on one side and into the hexagon socket on the other side and are secured using an O-ring. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with supplied with a frozen logo icon)
Content: 2 Stück (€40.05* / 1 Stück)
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €76.50*
%
Rear Fender “Bagger Facelift Kit” (suitable for Harley-Davidson models: Touring from 2014, incl. OEM Lighting) €1,340.10* €1,489.00*
Prod. no.: HD-TOU057
Surface: black glossy
Complete Cult-Werk rear conversion “Bagger” incl. mounting kit and lighting equipment suitable for Harley-Davidson Touring models from model year 2014 (Street Glide, Road Glide & Road King - also special versions as well as Ultra and Limited)!IMPORTANT: The rear conversion comes with a matching wiring harness incl. resistor for the correct flashing frequency and the original plug! The conversion is therefore absolutely PLUG AND PLAY! The original rear lights 3 in 1 as well as the license plate lighting of the models from 2024 is included in the kit!This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated modern 3-in-1 rear lights and license plate lighting for models from 2024!The “Bagger” rear fender has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then fit the ABS rear fender over the original metal fender and secure it with the original seat bench screws! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final installation of the ABS fender, the LED lights must be attached using the mounting brackets supplied and the license plate light must be inserted into the fender!The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - as the surface finish is perfect! The fender is supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)The following parts are included in the scope of delivery: - ABS rear fender - ORIGINAL 3in1 lighting units for Touring models from 2024 onwards - ORIGINAL license plate lights for Touring models from 2024 onwards - 2x holder for stiffening- 2x holder for lighting unit - Wiring harness incl. resistor and plug = plug and play - mounting material THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €1,242.00*
%
Bagger Case Kit, Gloss Black (suitable for Harley-Davidson models: Touring)
Prod. no.: HD-TOU066
Kompletter Cult-Werk Koffersatz passend für diverse Harley-Davidson Touring Modelle in schwarz glänzend mit passend gestickten Cult-Werk Inlets (Koffereinsätze). Im Lieferumfang sind folgende Teile enthalten:- Seitenkoffer in schwarz glänzend
Content: 2 Stück (€445.50* / 1 Stück)
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€891.00* €990.00*
%
Tip
License plate V1 (suitable for Cult-Werk Custom & Bagger fenders)
Prod. no.: HD-TOU054
Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€170.10* €189.00*
%
Tip
License plate V1 (suitable for Cult-Werk Custom & Bagger fenders)
Prod. no.: HD-TOU055
Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€179.10* €199.00*
%
Tip
License Plate Center V2 (suitable for Harley-Davidson models: CVO from 2023 & Street Glide + Road Glide from 2024)
Prod. no.: HD-TOU046-D
Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024! License plate size: W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! The plate comes with contour milling to pick up the milled elements of the CVO models! Included in delivery:- 1x milled license plate holder (glossy black)- 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - Mounting material
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€269.10* €299.00*
%
Tip
License Plate Center V2 (suitable for Harley-Davidson models: CVO from 2023 & Street Glide + Road Glide from 2024)
Prod. no.: HD-TOU045-D
Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024!V1 - All Black variant V2 - Black with contour milling License plate size: W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! Included in delivery:- 1x black powder-coated license plate holder - 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - mounting material
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€251.10* €279.00*
%
Tip
Rear fender "Bagger" V1 (suitable for Harley-Davidson models: Touring CVO from 2023 & Touring from 2024) €1,340.10* €1,489.00*
Prod. no.: HD-TOU050
Surface: black glossy
Complete Cult-Werk rear fender "Bagger" V1 incl. mounting kit suitable for Harley-Davidson models: Touring CVO from 2023 & Touring from 2024 The rear fender is plug & play and must be fitted over the original. The original rear lights can still be used as well as the original license plate light! This Cult-Werk rear fender is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and indicators. The rear fender "Bagger" V1 has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!) The following parts are included in the scope of delivery: - ABS rear fender - mounting material - 2x brackets for reinforcement
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €1,242.00*
%
Rear conversion kit "Bagger" V1 (suitable for Harley-Davidson models: Touring CVO from 2023 & Touring from 2024) €2,691.00* €2,990.00*
Prod. no.: HD-TOU048
Surface: black glossy
Complete Cult-Werk rear conversion kit "Bagger" V1, including rear fender with cut-out for original rear lights, long case and side cover set suitable for Harley-Davidson Touring models Touring - CVO models from 2023 and Touring models from 2024! ATTENTION: THE LIDS FROM THE ORIGINAL SIDE CASES DO NOT FIT THE SIDE CASES INCLUDED IN THE KIT, WHICH MEANS THAT THE REAR SPEAKERS MUST BE REMOVED! (CVO MODELS) With this kit, the original rear lights and the original license plate lighting are reused without changing the connection. This Cult-Werk KIT consists of several ABS plastic parts and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The excavator kit V1 has a very elaborate design! The Cult-Werk rear end is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and routing of the wiring harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (ATTENTION: Cases are always delivered in glossy black!!!! Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (does not need to be painted - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!) The following parts are included in the scope of delivery: - ABS rear fender- Side Covers left & right - Side case in glossy black - Mounting material (mounting bracket for rear lights) - 2x brackets for reinforcement
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €2,601.00*
%
Tip
Kellermann i.BOS - CL1
Prod. no.: HD-UNI050
Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€31.45* €34.95*
%
Tip
Kellermann i.LOAD - IL 1
Prod. no.: HD-UNI051
Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)
Currently not available, Delivery in 25-32 Days
€22.45* €24.95*
%
LED license plate light (incl. E-mark)
Prod. no.: HD-UNI046
Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening = 46mmCable length = 450mmScope of delivery = 1 pieceE-test mark
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€12.51* €13.90*
%
Side Cover Set CUSTOM (suitable for Harley-Davidson models: Touring ST 2022 & 2023) €580.50* €645.00*
Prod. no.: HD-TOU043
Surface: black glossy
The original Cult-Werk side cover set "Custom" suitable for all Harley-Davidson Touring ST models up to model year 2023! (Road Glide ST & Street Glide ST) The covers are ABS plastic parts and are CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. They are not cheap GRP! All assembly material is supplied for fitting the set and they can be replaced with the original small side covers in just a few minutes! This results in a nice continuous line up to the cases.The following two surface variants are available for these side covers: - Paintable (Minimal painting effort - as the surface finish is perfect! The side covers are supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the side covers shine in glossy black!) THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Content: 2 Stück (€290.25* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €481.50*
%
Air filter cover RACING (suitable for Harley-Davidson models: Softail from 2018 & Touring from 2021)
Prod. no.: HD-BRO040
Surface: paintable
The air filter cover „Racing“ from Cult-Werk suitable for all Harley-Davidson Softail models from 2018 with Millwaukee-Eight 114 engine as well as Touring models from 2021 with Millwaukee-Eight 114 and turns the ugly original air filter into a style element! This saves you a new air filter and also the TÜV registration. The cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this air filter cover : - Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy änzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€143.10* €159.00*
%
Front spoiler CUSTOM (suitable for Harley-Davidson models: Touring up to 2016)
Prod. no.: HD-TOU035
Surface: paintable
This Cult-Werk "Custom" front spoiler is suitable for all Harley-Davidson Touring models up to 2016! (Road Glide, Street Glide & Road King) The spoiler is an ABS plastic part and is manufactured on the most modern 5-axis machining centers CNC milled! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If there are grilles, please leave a short comment on the order completion page and we will be happy to pack some for your order! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€386.10* €429.00*
%
Mini resistor for LED indicators (suitable for Harley-Davidson models: all models)
Prod. no.: HD-UNI029
The mini resistor is suitable for all Harley-Davidson models with turn signal relays, where LED indicators are retrofitted. In addition, it is required on new models with a control unit in order to adjust the display on the speedometer according to frequency. This ensures that the flashing frequency remains the same and that the new LED indicators work properly!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€35.91* €39.90*
%
Front fender CUSTOM V1 (suitable for Harley-Davidson models: Touring from 2014) €346.50* €385.00*
Prod. no.: HD-TOU010
Inches: 23" | Productquality: perfect Cult-Werk quality | Surface: black glossy
The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €242.55*
%
Brake and clutch cylinder cover RACING (suitable for Harley-Davidson models: Touring from 2014 with hydraulic clutch)
Prod. no.: HD-TOU038
The Cult-Werk clutch and brake cylinder cover suitable forHarley-Davidson Touring models from 2014 with hydraulic Clutch!The covers are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring covers. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk lid. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it üfrozen for the seal, which are still needed! The covers are approx. 25mm higher than the original covers and were milled very elaborately. Different levels, recesses and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look!< /p>
Content: 2 Stück (€96.75* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€193.50* €215.00*
%
Side cover set CUSTOM (suitable for Harley-Davidson models: Touring from 2009)
Prod. no.: HD-TOU031
Surface: paintable
The Cult-Werk side cover set "Custom" suitable for all Harley-Davidson Touring models from 2009 to the present! (Road Glide, Street Glide & Road King) IMPORTANT INFORMATION: On Touring models from 2024 onwards, the side covers do not fit with the original short cases. Stretch cases must be used here as with the models up to 2023! Or it is best to install our “Bagger Kit” (HD-TOU048 & HD-TOU049)!The covers are ABS plastic parts and are CNC machined on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! All mounting material is included for assembling the set and they can be exchanged for the original small side covers in just a few minutes! This creates a nice, continuous line all the way to the cases. The following two surface variants are available for these side covers: - Paintable (Minimal painting effort because perfect surface finish! The side covers are delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - This saves you the entire cost of painting! Remove the protective film and the side covers shine in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Content: 2 Stück (€240.75* / 1 Stück)
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€481.50* €535.00*
%
Front spoiler CUSTOM (suitable for Harley-Davidson models: Touring from 2017, without crash bar)
Prod. no.: HD-TOU029
Surface: paintable
This Cult-Werk "Custom" front spoiler is suitable for all Harley-Davidson Touring models from 2017 to the present! (Road Glide, Street Glide & Road King)IMPORTANT: On models built from 2021, the front spoiler only comes without the original crash bar mountable. The spoiler can be modified independently for use with a bracket! The spoiler is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If there are grilles, please leave a short comment on the order completion page and we will be happy to pack some for your order! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€386.10* €429.00*
%
Brake cylinder cover RACING (suitable for Harley-Davidson models: Touring from 2008 with cable clutch)
Prod. no.: HD-TOU039
The Cult-Werk brake cylinder cover suitable for Harley-Davidson Touring models from 2008 with cable clutch! The lids are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring lid. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk cover. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it üfrozen for the seal, which are still needed! The covers are approx. 25mm higher than the original covers and were milled very elaborately. Different levels, recesses and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look!< /p>
Content: 2 Stück (€49.05* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€98.10* €109.00*
%
Air filter cover SPECIAL (suitable for Harley-Davidson models: Touring from 2017)
Prod. no.: HD-TOU018
Surface: paintable
The air filter cover „Racing“ from Cult-Werk is suitable for all Harley-Davidson Touring models from 2017 with Millwaukee-Eight 107 engine and makes a difference Add a style element to the ugly original air filter! This saves you a new air filter and also the TÜV registration. This cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this cover :- Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy änzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /span>
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€188.10* €209.00*
%
Headlight mask BAD LOOK (suitable for Harley-Davidson models: Road Glide from 2015)
Prod. no.: HD-TOU027
Surface: paintable
This Cult-Werk headlight mask "Bad Look" is suitable for all Harley-Davidson Touring Road Glide‚Ñ¢ models from 2015 (Road Glide‚Ñ¢, Road Glide‚Ñ¢ Special, Road Glide‚Ñ¢ Ultra & CVO‚Ñ¢ Road Glide‚Ñ¢). The mask is an ABS plastic part and is milled on the most modern 5-axis CNC machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which in turn saves costs because it is a perfect surface and no preparation or reworking of the parts is required! To assemble the headlight mask: This basically gets stuck in the Fehring by itself. Nevertheless, a high-quality assembly adhesive is included with which the mask is glued to the headlight at four adhesive points. Important: The glue should dry for 12 hours at room temperature (see application images in the product images)! The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€242.10* €269.00*
%
Travel limiter (12mm piston rod)
Prod. no.: HD-UNI033
Suitable for all Harley-Davidson models with external dampers and 12mm piston rod (e.g. Sportster). With these universal suspension travel limiters (4 pieces) Cult-Werk allows the deflection travel of the rear shock absorbers to be limited. The big advantage of these travel limiters is that they are made of relatively soft rubber. When touching down, no hard impacts are caused, but rather a "gentle" landing takes place. This prevents any possible landing on the tire. Assembly only takes a few seconds because the limiters are only clipped onto the piston rod. It is not necessary to remove the dampers! Dimensions: Inside √ò 12mm, outside √ò 38mm, thickness 10mm
Content: 4 Stück (€4.25* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€17.01* €18.90*
%
Front spoiler CUSTOM (suitable for Harley-Davidson models: Touring from 2021, with crash bar)
Prod. no.: HD-TOU040
Surface: paintable
This Cult-Werk "Custom" front spoiler is suitable for all Harley-Davidson Touring models from year 2021 up to now with the original small crash bar (Road Glide, Street Glide & Road King)! The spoiler is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If there are grilles, please leave a short comment on the order completion page and we will be happy to pack some for your order! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€386.10* €429.00*
%
Windshield RACING (suitable for Harley-Davidson models: Road Glide from 2015)
Prod. no.: HD-TOU025
Productquality: perfect Cult-Werk quality | Surface: paintable
This Cult-Werk windshield "Racing" is suitable for Harley-Davidson Touring Road Glide models built from 2015 (Road Glide, Road Glide Special, Road Glide Ultra & CVO Road Glide). < p>The windshield is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which is very cheap because the surface is perfect and no preparation or reworking of the parts is required! Installing the shield is not complicated as it is simply exchanged for the original one! The following two surface variants are available for this windshield: - Can be painted (Minimal painting effort because the surface is perfect! The sign is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus you save the entire painting costs! Remove the protective film and the sign shines in glossy black!) THE ASSEMBLY INSTRUCTIONS ARE IN THE TAB “DOWNLOADS” PROVIDED!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€242.10* €269.00*
%
Front fender CUSTOM V2 (suitable for Harley-Davidson models: Touring from 2014) €377.10* €419.00*
Prod. no.: HD-TOU008
Inches: 21" | Productquality: perfect Cult-Werk quality | Surface: black glossy
The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards for a sportier look. It is Shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €263.97*
%
Rear conversion CUSTOM V1 (suitable for Harley-Davidson models: Touring from 2014)
Prod. no.: HD-TOU020
Surface: paintable
Complete original Cult-Werk rear conversion "Custom" V1 incl. mounting kit suitable for Harley-Davidson Touring models from 2014 onwards (Street Glide‚Ñ¢, Road Glide‚Ñ¢ & Road King‚Ñ¢ - also special versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY! The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This Cult-Werk rear conversion is an ABS plastic part and is made using the latest technology 5-axis machining centers CNC milled! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V1 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can be √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 2x LED tail and brake lights 2 in 1 (already on the wiring harness)- 2x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness including resistor and plug = Plug and Play THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€953.10* €1,059.00*
%
7" LED headlight, black (suitable for Harley-Davidson models: Touring)
Prod. no.: HD-UNI008
Suitable for all Harley-Davidson Street Glide models from 2014 onwards as well as many other touring models with 7" headlights.IMPORTANT INFORMATION: It can be that you have to lose the spotlight! The adapter definitely fits the Street Glide, because you can disconnect a main plug a little further back on the wiring harness in order to use our adapter! The headlight is delivered in black with clear glass. It has two high beam projector lenses and two low beam lenses. The LED´s have a very long lifespan and are shock and vibration resistant. Installing the headlight is very simple and can easily be replaced. The adapter plugs required for installation are included in the delivery – Plug & Play = ONLY WITH THE STREET GLIDE! Power: 20 / 40 wattsVoltage: 10-100 V DCLumen: 1350lm / 1770lmSize: 176.5 mm x 176.5mm x 98.3mmApproval: E-test mark and therefore registration-free!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€260.10* €289.00*
%
Ignition cover (suitable for Harley-Davidson models: with Millwaukee-Eight engine)
Prod. no.: HD-UNI038
Suitable for all Harley-Davidsons from 2017 onwards with the Millwaukee-Eight (M8) engine (107, 114 & 117)! Milled from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk ignition cover (timer cover) is anodized black and comes with the Cult-Werk logo. The look and design is then milled into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Breakout.
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€116.10* €129.00*
%
Rear conversion CUSTOM V2 (suitable for Harley-Davidson models: Touring from 2014) €1,340.10* €1,489.00*
Prod. no.: HD-TOU023
Surface: black glossy
Complete Cult-Werk rear conversion "Custom" including mounting kit suitable for Harley-Davidson Touring models from 2014 (Street Glide, Road Glide & Road King - also special Versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY!The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This one Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V2 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 6x LED tail and brake lights 2 in 1 (already on the wiring harness)- 4x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness incl. resistor and plug = Plug and Play THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €1,242.00*
%
Tank cap PopUp Ultraflat
Prod. no.: HD-UNI009
Color: black
This pop-up tank cap in ultra-flat design with a right-hand thread and ventilation suitable for all Harley-Davidson tanks from 1996 onwards. (Dyna, Softail, Heritage, Fatboy, Touring etc. ...) (The exception is models that have a ventilation pipe in the tank neck, which rests against the locking of the pop-up function in the middle of the lid. It's best to check beforehand, the R may have to be used ötube can be flexed. Most of the time it is enough to move the locking pin on the side where it touches the tube a little so that it is flush with the guide there. Or you can Grind the split pin a little at both ends so that it doesn't protrude over the guide!) The special thing about the high-quality lid equipped with a seal is the retractable knurled screw with pop -Up function. If you press the closed tank cap with your thumb, the knurled screw can be recessed by turning it 90°. The lid is now ultra-flat and has a classic smooth look. Ma ße: external diameter 60 mm, height with countersunk knurled screw 36 mm, diameter of the knurled screw 38 mm, height of the knurled screw 9 mm. Thread diameter approx. 45 mm, thread depth approx. 28 mm
Currently not available, Delivery in 40-47 Days
€58.50* €65.00*
%
LED indicator set CLEAN STYLE (suitable for Harley-Davidson models: Street Glide from 2014, original LED)
Prod. no.: HD-TOU024
Productquality: perfect Cult-Werk quality
Suitable for all Harley-Davidson Touring Street Glide models (Street Glide & Street Glide Special) from 2014 onwards! IMPORTANT: THIS SET FITS ALL MODELS THAT HAVE ORIGINAL LED LIGHTING INSTALLED!The indicator set NOW comes with a wiring harness including resistor f ür the right flashing frequency! The set is therefore absolutely PLUG AND PLAY! The Cult-Werk indicator set gives your motorcycle a clean and cool look! This is a 100% precisely fitting ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the indicator set only needs to be exchanged for the original. Original fit - new design. Included in delivery:- 2x ABS plastic indicator holder (glossy black) - 2x LED indicators including E-test mark and therefore registration-free!- Wiring harness including resistor and plug = Plug and Play
Content: 2 Stück (€112.05* / 1 Stück)
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€224.10* €249.00*
%
Handlebar grip set (1", E-Gas models)
Prod. no.: HD-UNI006
Version: without milling
Suitable for all Harley-Davidson models with 1 inch handlebars and electronic throttle pickup! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - with milling (the handles are supplied with the CWC logo milled into the End caps supplied) - can be found in the shop with the item number HD-UNI007
Content: 2 Stück (€53.55* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€107.10* €119.00*