The Cult-Werk headlight mask "V-Rod Style" suitable for all Harley-Davidson Breakout models from 2025 onwards. gives your motorcycle the popular look of the Harley-Davidson V-Rod / Night Rod. The original Breakout 2025 LED headlight remains and will continue to be used in conjunction with the kit. In conjunction with the headlight mask, which is made of high-quality ABS plastic (not GRP!!!), you will receive a CNC-lasered headlight bracket from us, which lowers the headlight and ensures a perfect fit. This creates an even more aggressive look and makes the Harley appear lower and longer. The speedometer remains in the original position! No changes to the original cables are necessary! All holes required for attaching the mask are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted to optimally adjust the headlight range. The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Black glossy (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!)

The Cult-Werk headlight kit "Night Rod Style" suitable for all Harley-Davidson Breakout models from 2025 gives the motorcycle the popular look of the Harley-Davidson Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker" will be available to you. Supplied with the look of the V-Rod / Night Rod. This must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort, because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save all the painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard Germany license plates) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for our central license plate holder (HD-BRO078 & HD-BRO079)! Also perfect for use with other holders. The exact dimensions below.Product specifications: Length = 43mm x width = 10mm x height = 12mm Thread spacing f ür Fastening = 27mm Cable length = 250mm Scope of delivery = 1 piece E-test mark

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

With this kit from Cult-Werk suitable for all Harley-Davidson Low Rider S models from 2022 onwards the speedometer can be relocated to the original headlight mask! The offset can only be used in conjunction with a new handlebar clamp, such as: HD-SPO029! It is made of steel and then powder-coated in glossy black! No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the holder replaces the original holder of the mask and the mask can then be attached to the new holder again! A cover is included for the speedometer, which serves as splash protection from below and for fastening!

The Cult-Werk headlight mask "V-Rod Style" suitable for all Harley-Davidson Breakout models from 2018 until 2024 & gives your motorcycle the popular look of the Harley-Davidson V-Rod / Night Rod. The original Breakout 2018 LED headlight remains and will continue to be used in conjunction with the kit. In conjunction with the headlight mask, which is made of high-quality ABS plastic (not GRP!!!), you will receive a CNC-lasered headlight bracket from us, which lowers the headlight and ensures a perfect fit. This creates an even more aggressive look and makes the Harley appear lower and longer. The speedometer remains in the original position! No changes to the original cables are necessary! All holes required for attaching the mask are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted to optimally adjust the headlight range. The following two surface variants are available for this headlight mask:< /strong> - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Black glossy nzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) < strong> THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

The Cult-Werk headlight kit "Night Rod Style" suitable for all Harley-Davidson Breakout models from 2013 to 2017 gives the motorcycle the popular look of the Harley-Davidson< sup> Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker" will be available to you. Supplied with the look of the V-Rod / Night Rod. This must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. The following two surface variants are available for this headlight mask : - Can be painted (Minimal painting effort, because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save all the painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The mini resistor is suitable for all Harley-Davidson models with turn signal relays, where LED indicators are retrofitted. In addition, it is required on new models with a control unit in order to adjust the display on the speedometer according to frequency. This ensures that the flashing frequency remains the same and that the new LED indicators work properly!

Suitable for all Harley-Davidson FXDR models from 2019 onwards. CNC milled/lasered, knurled and then black powder-coated. Can be combined with all common indicators, for example from Kellermann ! The holders are screwed to the original fastening points of the front indicators in order to then be able to mount a custom indicator!

The Cult-Werk headlight kit "CVO Style" suitable for all Harley-Davidson Breakout models from 2013 to 2017 gives the motorcycle the popular look of the Harley-Davidson Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker"< will be available to you /strong> supplied with the look of the V-Rod / Night Rod. The headlight must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. THE ASSEMBLY INSTRUCTIONS AS WELL AS THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>

Suitable for all Harley-Davidson Softail models from 2018 until 2024 except the Harley-Davidson FXDR! CNC milled/lasered, knurled and then black powder-coated. Can be combined with all common indicators, for example from Kellermann! The holders are mounted on the handle fittings and simply screwed onto the mirrors!

With this kit from Cult-Werk suitable for all Harley-Davidson Low Rider S models from 2018 to 2021 k öThe fittings can be relocated to the original headlight mask! This ensures a much better view of the fittings as you no longer have to look down at the tank! The offset is required in conjunction with our Dash Cover! It is made of steel and then powder-coated with a glossy black finish! No cables need to be extended during assembly; it is enough to reroute the cables to get them to the right one Position to get! In principle, the holder replaces the original holder of the mask and the mask can then be attached to the new holder again! Two covers are included for the fittings, which serve as splash protection from below and for fastening! THE ASSEMBLY INSTRUCTIONS ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

The "Old School" 3 in 1 LED set (rear and brake light as well as indicators) is mainly installed at Cult-Werk on the Sportster models due to its appearance, but it can also be used on various other models be used! High-quality power LEDs are installed in the black aluminum housing and all indicators are delivered with E-mark - FREE OF REGISTRATION. IMPORTANT: We recommend using the Mini on offer -Resistor (HD-UNI029) so that the display and the flashing frequency work properly!! Product specifications: 45mm x approx. 70mm, threaded bolt = M10 x 1.5 mm & Scope of delivery = 1 pairConnections: Black cable = ground (-), Blue cable = turn signal (+), Yellow cable = taillight (+) & Red cable = brake light (+)

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

The Cult-Werk indicator mounting plates are required for converting to smaller indicators. The plates fit many Harley-Davidson models such as Sportster, Dyna or Softail! The mounting plates are designed so that the pressure points in the paint are also covered by the original indicators. Ideal for converting original indicators to smaller indicators. Suitable for all indicators with 8mm and 10mm threads. The mounting plates are screwed together with the smaller indicators and thus cover the second hole of the original indicators. CNC lasered. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

The "Old School" LED indicator set at Cult-Werk is mainly installed on the Sportster models due to its appearance, but it can be used on various other models! High-quality power LEDs are installed in the black aluminum housing and all indicators are delivered with E-mark - FREE OF REGISTRATION. IMPORTANT: We recommend using the Mini on offer -Resistor (HD-UNI029) so that the display and the flashing frequency work properly!! Product specifications: 45mm x approx. 70mm, threaded bolt = M10 x 1.5 mm & Scope of delivery = 1 pair

Suitable for all Harley-Davidson Softail models from 2008 onwards as well as for V-Rod, Night Rod Special, Muscle, Street Rod and Rocker models and also for Dyna models. CNC milled and then black powder-coated. Can be combined with all common indicators, for example from Kellermann! The holders are mounted on the handle fittings and simply screwed onto the mirrors!