%
Clutch cover "VISION" (suitable for Harley-Davidson models: Softail from 2019)
Prod. no.: HD-BRO158
Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic). Milled and laser-cut from high-quality aluminum on state-of-the-art 5-axis machining centers. Its special highlight: an integrated inspection glass that offers a permanent view of the inner workings. This not only allows you to keep an eye on the condition of the inside at all times, but also gives your bike an unmistakable look. It can be easily replaced with the original part.
Currently not available, Delivery in 12-19 Days
€179.99* €219.00*
%
SET Dash Cover including speedometer offset (suitable for Harley-Davidson models: Low Rider S from 2018 to 2021) €404.10* €449.00*
Prod. no.: HD-BRO124
Surface: black glossy
The dash cover including the speedometer offset from Cult-Werk fits all Harley-Davidson Low Rider S models from 2018 to 2021! The kit gives your motorcycle a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! During assembly it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is attached with the new bracket supplied attached (Details can be found in the assembly instructions!). The following surface variants are available for this dash cover:- Can be painted (Minimal painting effort because the surface is perfect! The cover is delivered ready for painting and can basically be painted immediately!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black) THE ASSEMBLY INSTRUCTIONS ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €386.10*
%
Dash Cover (suitable for Harley-Davidson models: Low Rider from 2018 & Breakout from 2023)
Prod. no.: HD-BRO120
Surface: paintable
The dash cover from Cult-Werk fits all Harley-Davidson Low Rider S, Low Rider ST from year of manufacture 2018 and on Breakout 117 from year of manufacture 2023!The part gives your motorcycle a clean, cool and flatter look on the tank and is needed as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! When installing models from 2018 to 2020, it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is included attached to the new bracket supplied (Details can be found in the assembly instructions!). On the newer models there is an additional retaining bracket that is screwed to the original bracket so that the screw connection goes further up! The following surfaces The following variants are available for this dash cover:- Can be painted (Minimal painting effort, because the surface is perfect! The cover is delivered ready for painting and can basically be used immediately be painted!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€242.10* €269.00*
%
Fork cover kit (suitable for Harley-Davidson models: Breakout from 2018, with milling) €449.10* €499.00*
Prod. no.: HD-BRO028
Variation: incl. lower fork cover made of aluminum
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with folding gaiters suitable for Harley-Davidson Breakout models from 2018 onwards. With this kit from Cult-Werk you can cover the fork tubes above , between and below the fork bridges. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with CWC logo milled, 2x upper fork covers & 2x lower fork covers) - Kit with folding linings (2x fork caps with CWC logo milled, 2x Upper Fork Cover & 2x 49mm Folding Bälge)
Content: 6 Stück (€74.85* / 1 Stück)
Currently not available, Delivery in 12-19 Days
Variants from €269.10*
%
Lower fork cover (suitable for Harley-Davidson models: Softail from 2018) €260.10* €289.00*
Prod. no.: HD-BRO055
Productquality: perfect Cult-Werk quality
Suitable for Harley-Davidson FXDR, Low Rider S and Fat Bob models from 2018 onwards. IMPORTANT: It is absolutely necessary to remove the cat eyes on the fork so that the fork can move freely can immerse yourself in the covers! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed together with the brake calipers. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!
Content: 2 Stück (€130.05* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €182.07*
%
Fork caps (suitable for Harley-Davidson models: Breakout from 2018)
Prod. no.: HD-BRO043-B
Productquality: B-Stock quality | Version: without milling
The Cult-Werk fork caps suitable for all Harley-Davidson Breakout models from 2018! They cover the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! Colour: black-glossy powder-coated, scope of delivery: 2 pieces The following two Versions are available for these fork caps: - without milling (the caps are delivered in pure black) - with milling (the caps are also milled §stem logo icon supplied)
Content: 2 Stück (€45.15* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€90.30* €129.00*
%
Rear axle cover (suitable for Harley-Davidson models: Softail from 2018) €67.50* €75.00*
Prod. no.: HD-BRO073
Productquality: perfect Cult-Werk quality | Version: without milling
These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2018 onwards (except FXDR) with the original axle and cover them on both sides. The covers are placed over the axle and over the nut and clamped with set screws. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with Delivered with frozen CWC logo) IMPORTANT INFORMATION: The axle covers are basically designed for the original setup! If a license plate holder from us is used, please leave a comment on the order completion page, because it is made with our special nut two low versions of the cover are required!
Content: 2 Stück (€33.75* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
Variants from €62.37*
%
Fork Cover Kit (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO105
Version: without milling
Complete 4-piece fork cover kit in black with the fork caps in pure black or with milling suitable for Harley-Davidson Street Bob and Softail Standard models from 2018! With this kit from Cult-Werk you can cover the fork tubes above and between the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using threaded pins and thus center themselves on the fork tubes. This ensures a secure hold! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two versions are available for this fork cover kit : - without milling (the caps are delivered in pure black) - with milling (the caps are delivered with milled CWC logo)
Content: 4 Stück (€40.28* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€161.10* €179.00*
%
Brake cylinder cover (Breakout from 2013 & Softail from 2018)
Prod. no.: HD-BRO016
The Cult-Werk aluminum brake cylinder cover with milling solution suitable for all Harley-Davidson Breakout models from 2013 to the present as well as for Harley-Davidson Softail models from 2013 onwards 2018! The lid is milled from aluminum on the most modern 5-axis CNC machines and replaces the original, somewhat boring lid. Of course, it is also CNC milled on the inside, i.e. the inside of the lid corresponds to the original lid, because there are guides for the seal, which are still needed.
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€89.10* €99.00*
%
Fork caps (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-BRO101-B
Productquality: B-Stock quality | Version: without milling
The Cult-Werk fork caps suitable for Harley-Davidson Street Bob, Softail Standard and Fat Boy models from 2018! They cover the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Colour: black-glossy powder-coated, scope of delivery: 2 pieces The following two Versions are available for these fork caps: - without milling (the caps are delivered in pure black) - with milling (the caps are also milled §stem CWC logo delivered)
Content: 2 Stück (€26.25* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€52.50* €75.00*
%
Front spoiler CUSTOM (suitable for Harley-Davidson models: Breakout from 2013 - 2017)
Prod. no.: HD-BRO080
Surface: paintable
This "Custom" front spoiler from Cult-Werk is suitable for all Harley-Davidson Breakout models from 2013 to 2017! The spoiler is ABS Plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If grids are included, please leave a short comment on the order completion page! THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /span>
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€386.10* €429.00*
%
Upper fork cover (suitable for Harley-Davidson models: Breakout from 2018)
Prod. no.: HD-BRO030-B
Productquality: B-Stock quality
Suitable for all Harley-Davidson Breakout models from 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the upper fork tubes between the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Assembly is very simple, the cover is simply pushed over the fork tube and screwed tight. All parts required for assembly are included in the kit!
Content: 2 Stück (€45.15* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€90.30* €129.00*
%
Radiator cover RACING (suitable for Harley-Davidson models: Breakout up to 2017)
Prod. no.: HD-BRO064
Surface: paintable
The Cult-Werk radiator cover "Racing" is manufactured in 3D design and suitable for all Harley-Davidson Breakout models up to 2017 !This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers. Two metal brackets and all fastening material are included in the scope of delivery, with which you can Radiator cover is attached to the frame of the breakout. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 45 minutes! The following two surface variants are available for this radiator cover: - Paintable §hig (Minimal painting effort 'Äì because perfect surface quality! The cladding is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - therefore Save yourself the entire cost of painting! Remove the protective film and the cladding shines in glossy black!) THE PARTS REPORT IS IN THE "DOWNLOADS" TAB " PROVIDED!!!
In stock, delivery in 10-13 Days - Company holiday from 07.08 to 23.08
€580.50* €645.00*
%
Radiator cover RACING (Breakout from 2018 & FXDR)
Prod. no.: HD-BRO039
Productquality: perfect Cult-Werk quality | Surface: paintable
The Cult-Werk radiator cover "Racing" is manufactured in 3D design and suitable for all Harley-Davidson Breakout models from 2018< /strong> as well as suitable for Harley-Davidson FXDR models from 2019 onwards! This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers. Two metal brackets and all fastening material are included in the scope of delivery, with which you can Radiator shroud is attached to the frame of the Breakout or FXDR. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 1 hour! The following two surface variants are available for this radiator cover: - Can be painted (minimal painting effort ' Äì the perfect surface condition! The cladding is delivered primed and only needs to be painted!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cladding shines in glossy black) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /strong>
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€580.50* €645.00*
%
Front spoiler BOBBER (suitable for Harley-Davidson models: Softail from 2018) €224.10* €249.00*
Prod. no.: HD-BRO090
Productquality: perfect Cult-Werk quality | Surface: paintable
The Cult-Werk front spoiler "Bobber" suitable for all Harley-Davidson Softail models from 2018 (Breakout, Fat Bob, Fat Boy, FXDR 114, Street Bob, Softail Slim, Low Rider, Standard, etc...)! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only needs to be screwed onto the supplied metal bracket. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The following two surface variants are available for this spoiler: - Painting available hig (Minimal painting effort because of perfect surface quality! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus saving Remove the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE PARTS APPROVAL WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Currently not available, Delivery in 12-19 Days
Variants from €169.47*
%
Frame cover (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO126
100% precisely fitting ABS plastic part - NO GRP! All existing holes and millings are milled on the most modern 5-axis CNC machining centers, so that the frame cover only needs to be installed. It greatly enhances your motorcycle, as all cables, screw points and the damper are concealed! The part is delivered in glossy black! (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) IMPORTANT INFORMATION: The frame cover should Can be used in conjunction with our swing saddle (HD-BRO125). If the frame cover is used with the original struts (e.g. for original fenders), you have to adjust the cover backwards at the corners!!
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€224.10* €249.00*
%
Fork Cover Kit (suitable for Harley-Davidson models: Breakout from 2018) €440.10* €489.00*
Prod. no.: HD-BRO044
Variation: incl. lower fork cover made of aluminum
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with folding gaiters suitable for Harley-Davidson Breakout models from 2018 onwards. With this kit from Cult-Werk you can cover the fork tubes above , between and below the fork bridges. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps, 2x upper fork covers & 2x lower fork covers) - Kit with folding covers (2x fork caps, 2x upper fork covers & 2x 49mm folding covers älge)
Content: 6 Stück (€73.35* / 1 Stück)
Currently not available, Delivery in 32-39 Days
Variants from €260.10*
%
Side cover set RACING (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-BRO050
Productquality: perfect Cult-Werk quality | Surface: paintable | Variation: Clean for airride systems
The Cult-Werk side cover set "Racing" in two different versions (clean for airride or with cutout for damper adjustment) suitable for almost all Harley-Davidsons Softail models from 2018 onwards and of course also suitable for the FXDR 114 from 2019 onwards (on the FXDR the covers are absolutely necessary in conjunction with our rear conversion "Racing")! IMPORTANT: To mount the left side cover on the FXDR, an additional threaded retaining bracket is required to fasten the side cover √∂nen. You can find this bracket in our shop with the item number HD-UNI013 or directly here on the detail page under accessories items! These lids are an ABS plastic part and are CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! The side covers ÄûRacing‚Äú have been elaborately designed and create a cool and clean look after installation on your motorcycle! As with the original, the covers can be ordered with a cutout for damper adjustment or with a clean look for airride systems. The following two surfaces Variants of surfaces are available for this side cover set: - Can be painted (Minimal painting effort - because the surface is perfect! The side covers are delivered ready for painting and can in principle can be painted immediately!) - Glossy black (no need to be painted anymore - so you save the entire painting costs! Remove the protective film and the lids shine in glossy black!) < p>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !
Content: 2 Stück (€121.05* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€242.10* €269.00*
%
Lower fork cover (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO026-B
Productquality: B-Stock quality
Suitable for all Harley-Davidson Breakout models from 2013 to 2017. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This fork cover kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!
Content: 2 Stück (€97.65* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€195.30* €279.00*
%
Lower fork cover (suitable for Harley-Davidson models: Breakout from 2018) €251.10* €279.00*
Prod. no.: HD-BRO031
Productquality: perfect Cult-Werk quality
Suitable for all Harley-Davidson Breakout models from 2018 onwards. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!
Content: 2 Stück (€125.55* / 1 Stück)
Currently not available, Delivery in 12-19 Days
Variants from €175.77*
%
Tip
Carbon engine parts SET (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-EXC009
Cult-Werk carbon engine parts suitable for all Harley-Davidson Softail models from 2018 with a Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117, Fat Boy, Heritage, Heritage Classic, Softail Slim, Fat Bob, Sport Glide & Deluxe)! DOES NOT FIT: Low Rider, Low Rider S, Low Rider ST, Street Bob, Softail StandardReal craftsmanship for Harley-Davidson enthusiasts: These carbon parts set standards in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the road with less weight and more elegance.IMPORTANT: There is also an ignition cover mounted in the pictures, this is not included in the kit and is intended for use To illustrate what it can look like!
Currently not available, Delivery in 51-58 Days
€3,510.00* €3,900.00*
%
Clutch cover (suitable for Harley-Davidson models: Softail from 2019)
Prod. no.: HD-BRO083
Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic).< /p> Milled and lasered from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk clutch cover (Derby Cover) is anodized black. The look and design is then milled and lasered into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Harley.
No longer available
€143.10* €159.00*
%
Fork caps (suitable for Harley-Davidson models: various models)
Prod. no.: HD-UNI036-B
Productquality: B-Stock quality
The Cult-Werk fork caps cover the ends of the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. These caps are suitable for Harley-Davidson V-Rod / Night Rod models from 2002 to 2011, Breakout models from 2013 to 2017 as well as Dyna models from 2007 to 2017! Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! 1 set = 2 pieces
Content: 2 Stück (€26.25* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€52.50* €75.00*
%
Tip
Carbon valve cover pair (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-EXC003
Cult-Werk carbon valve cover suitable for all Harley-Davidson Softail models from 2018 onwards with Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117, Softail Standard, Street Bob, Fat Boy, Heritage, Low Rider, Low Rider S, Softail Slim, Fat Bob, Sport Glide & Deluxe)!Real craftsmanship for Harley-Davidson enthusiasts: These carbon parts set maßstä be in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the road with less weight and more elegance.
Content: 2 Stück (€627.75* / 1 Stück)
few pieces available, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€1,255.50* €1,395.00*
%
Upper fork cover (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO015-B
Productquality: B-Stock quality
With this 2-piece fork cover kit from Cult-Werk you can hide the upper fork tubes between the fork clamps. This means the fork tubes are covered and the entire fork appears beefier and completely black. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Assembly is very simple, the cover is simply pushed over the fork tube and screwed tight. All parts required for assembly are included in the kit!
Content: 2 Stück (€45.15* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€90.30* €129.00*
%
Fork Cover Kit (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO103
Version: without milling
Complete 6-piece fork cover kit in black with the fork caps in pure black or with milling suitable for Harley-Davidson Street Bob and Softail Standard models from 2018! With this kit from Cult-Werk you can cover the fork tubes above, between and below the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using threaded pins and thus center themselves on the fork tubes. This ensures a secure hold! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two versions are available for this fork cover kit : - without milling (the caps are delivered in pure black) - with milling (the caps are delivered with milled CWC logo)
Content: 6 Stück (€64.35* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€386.10* €429.00*
%
Front axle cover (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-BRO042
Version: without milling
These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2018 onwards (except Sport Glide) and cover the ends of the front axle on both sides of the front fork. The covers are inserted into the hollow axle on one side and into the hexagon socket on the other side and are secured using an O-ring. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with supplied with a frozen logo icon)
Content: 2 Stück (€38.25* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€76.50* €85.00*
%
Fork Cover Kit (suitable for Harley-Davidson models: Breakout 2013 - 2017) €404.10* €449.00*
Prod. no.: HD-BRO011
Variation: incl. lower fork cover made of aluminum
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with folding linings suitable for Harley-Davidson Breakout models from 2013 to 2017. With this kit from Cult-Werk you can blend them Fork tubes above, between and below the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps, 2x upper fork covers & 2x lower fork covers) - Kit with folding covers (2x fork caps, 2x upper fork covers & 2x 49mm folding covers älge)
Content: 6 Stück (€67.35* / 1 Stück)
Currently not available, Delivery in 12-19 Days
Variants from €215.10*
%
Tip
Carbon primary cover (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-EXC001
Cult-Werk carbon primary cover suitable for all Harley-Davidson Softail models from 2018 with Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117, Fat Boy , Heritage, Heritage Classic, Softail Slim, Fat Bob, Sport Glide & Deluxe)!DOES NOT FIT with: Low Rider, Low Rider S, Low Rider ST, Street Bob, Softail StandardReal craftsmanship for Harley-Davidson enthusiasts: These carbon parts set standards in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the road with less weight and more elegance.IMPORTANT: In some pictures a clutch cover is mounted, this is not included directly with the primary cover and is intended for use To illustrate what it can look like!
Currently not available, Delivery in 31-38 Days
€1,165.50* €1,295.00*
%
Tip
Carbon camshaft cover (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-EXC004
Cult-Werk carbon camshaft cover suitable for all Harley-Davidson Softail models from 2018 onwards with Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117, Softail Standard, Street Bob, Fat Boy, Heritage, Low Rider, Low Rider S, Softail Slim, Fat Bob, Sport Glide & Deluxe)!Real craftsmanship for Harley-Davidson enthusiasts: These carbon parts set maßstä be in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the road with less weight and more elegance.IMPORTANT: In some pictures there is a timer cover mounted, this is not included directly with the camshaft cover and is intended for clarity , what it can look like!
Currently not available, Delivery in 31-38 Days
€535.50* €595.00*
%
Ignition cover (suitable for Harley-Davidson models: with Millwaukee-Eight engine)
Prod. no.: HD-UNI038
Suitable for all Harley-Davidsons from 2017 onwards with the Millwaukee-Eight (M8) engine (107, 114 & 117)! Milled from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk ignition cover (timer cover) is anodized black and comes with the Cult-Werk logo. The look and design is then milled into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Breakout.
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€116.10* €129.00*
%
Front spoiler CUSTOM (suitable for Harley-Davidson models: Softail from 2018) €436.50* €485.00*
Prod. no.: HD-BRO068
Surface: black glossy
This "Custom" front spoiler from Cult-Werk is suitable for almost all Harley-Davidson Softail models from 2018 to current (THE BUG SPOILER DOES NOT FIT ON: FAT BOB & LOW RIDER S)! The spoiler is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If grids are included, please leave a short comment on the order completion page! THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /span>
In stock, delivery in 10-13 Days - Company holiday from 07.08 to 23.08
Variants from €386.10*
%
Brake caliper cover 3D (Cult-Werk® Customs)
Prod. no.: HD-UNI010
These Cult-Werk brake caliper covers with 3D look are self-adhesive and are glued to the original silver covers of the brake caliper. When you order you will receive a set (2 pieces) of covers in glossy black with "Cult-Werk Customs" lettering and CWC logos! The covers fit all Harley-Davidson Softail models from 2000 to 2017, for Softail models from 2018 only on the front, for Dyna models from 2000 to 2017 and also for all Sportster models !
Content: 2 Stück (€6.26* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€12.51* €13.90*
%
Tip
Carbon clutch housing cover (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-EXC005
Cult-Werk carbon clutch housing suitable for all Harley-Davidson Softail models from 2018 with Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117, Softail Standard, Street Bob, Fat Boy, Heritage, Low Rider, Low Rider S, Softail Slim, Fat Bob, Sport Glide & Deluxe)!Real craftsmanship for Harley-Davidson enthusiasts: These carbon parts set standards practice in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the street with less weight and more elegance.
Currently not available, Delivery in 31-38 Days
€202.50* €225.00*
%
Tip
Carbon tank cover (suitable for Harley-Davidson models: FXDR from 2019)
Prod. no.: HD-EXC007
Cult-Werk carbon tank cover suitable for Harley-Davidson Softail FXDR models from 2019 with Milwaukee Eight engine (FXDR 114 & FXDRS)! Genuine Craftsmanship for Harley-Davidson enthusiasts: These carbon parts set standards in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the street with less weight and more elegance.
Currently not available, Delivery in 31-38 Days
€355.50* €395.00*
%
Upper fork cover (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO113-B
Productquality: B-Stock quality
The fork cover from Cult-Werk covers the upper fork tubes between the two fork clamps and is suitable for all Harley-Davidson Street Bob and Softail Standard models from 2018 onwards. The entire fork appears as a result beefier and all chrome is also blinded. The covers are made of high-quality aluminum that is machined and milled on the most modern 5-axis machining centers! Colour: black-glossy powder-coated, scope of delivery: 2 pieces ºck
Content: 2 Stück (€41.65* / 1 Stück)
In stock, delivery in 10-12 Days - Company holiday from 07.08 to 23.08
€83.30* €119.00*