Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic). Milled and laser-cut from high-quality aluminum on state-of-the-art 5-axis machining centers. Its special highlight: an integrated inspection glass that offers a permanent view of the inner workings. This not only allows you to keep an eye on the condition of the inside at all times, but also gives your bike an unmistakable look. It can be easily replaced with the original part.

This is a pair of lighting units for our original center license plate holder suitable for Harley-Davidson Softail models. The units are supplied incl. permanently mounted 3in1 LED lighting and can be used to convert the center bracket to direct lighting at a later date!

The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

The "Wave" mirror set in black gives your motorcycle a super cool look. Small color accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC-milled lines of the housing create both a modern and a classic look. WITH EC / ABE - E-approved!Product specifications: Head width = 124 mm, head height = 86 mm, total width: 225 mm, total height: 175 mm Handlebar length: 55 mm to the bend, then 130 mm to the joint and another 40 mm to the threaded bolt, (without adapter 29 mm)Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard Germany license plates) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

This is a pair of end caps V2 for our original Cult-Werk crash bars. Supplied with black aluminum end caps in black with subsequent "Cult-Werk Clubstyle" design milling. These caps are perfect in combination with the golden spacers to achieve a high-quality clubstyle look on the motorcycle! Scope of delivery: 2 pieces / milled black Length: 45mm

This is a pair of V1 end caps for our original Cult-Werk crash bars. Supplied with black plastic end caps in black which serve as "pomps" for the crash bar in the event of a fall! Scope of delivery: 2 pieces / black Length: 50mm

This is a pair of spacers for our original Cult-Werk crash bars. They are supplied in gold anodized and can be mounted on the crash bar as an eye-catcher for the perfect look! Scope of delivery: 2 pieces / gold anodized Thickness: 15mm

The original Cult-Werk "Clubstyle" crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black milled aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" X1 crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

With this kit from Cult-Werk suitable for all Harley-Davidson Low Rider S models from 2022 onwards the speedometer can be relocated to the original headlight mask! The offset can only be used in conjunction with a new handlebar clamp, such as: HD-SPO029! It is made of steel and then powder-coated in glossy black! No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the holder replaces the original holder of the mask and the mask can then be attached to the new holder again! A cover is included for the speedometer, which serves as splash protection from below and for fastening!

The front fender from Cult-Werk suitable for Harley-Davidson Low Rider S models from 2018 helps create a sportier look . It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! No adjustment work required! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. Original fit - new design with indicated air inlets including grilles to cover the openings. The following surface variant is available for this front fender:- Can be painted (Minimal painting effort because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The dash cover including the speedometer offset from Cult-Werk fits all Harley-Davidson Low Rider S models from 2018 to 2021! The kit gives your motorcycle a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! During assembly it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is attached with the new bracket supplied attached (Details can be found in the assembly instructions!). The following surface variants are available for this dash cover:- Can be painted (Minimal painting effort because the surface is perfect! The cover is delivered ready for painting and can basically be painted immediately!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black) THE ASSEMBLY INSTRUCTIONS ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The front fender from Cult-Werk suitable for Harley-Davidson Low Rider S models from 2018 gives a sportier look . It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! No adjustment work required! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. Original fit - new design. The following surface variants are available for this front fender:- Can be painted (minimal painting effort because the perfect surface ächen quality! The front spoiler is delivered ready for painting and can basically be painted immediately!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and The original front spoiler shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The dash cover from Cult-Werk fits all Harley-Davidson Low Rider S, Low Rider ST from year of manufacture 2018 and on Breakout 117 from year of manufacture 2023!The part gives your motorcycle a clean, cool and flatter look on the tank and is needed as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! When installing models from 2018 to 2020, it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is included attached to the new bracket supplied (Details can be found in the assembly instructions!). On the newer models there is an additional retaining bracket that is screwed to the original bracket so that the screw connection goes further up! The following surfaces The following variants are available for this dash cover:- Can be painted (Minimal painting effort, because the surface is perfect! The cover is delivered ready for painting and can basically be used immediately be painted!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The air filter cover „Racing“ from Cult-Werk suitable for all Harley-Davidson Softail models from 2018 with Millwaukee-Eight 114 engine as well as Touring models from 2021 with Millwaukee-Eight 114 and turns the ugly original air filter into a style element! This saves you a new air filter and also the TÜV registration. The cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this air filter cover : - Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy änzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for Harley-Davidson FXDR, Low Rider S and Fat Bob models from 2018 onwards. IMPORTANT: It is absolutely necessary to remove the cat eyes on the fork so that the fork can move freely can immerse yourself in the covers! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed together with the brake calipers. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!

Suitable for all Softail models from 2018 with monoshock damper and 16mm piston rod! With this universal suspension travel limiter from Cult-Werk, the deflection of the limit the rear shock absorber. The big advantage of this travel limiter is that it is made of relatively soft rubber. This means that when you put it on, no hard bumps are caused, but rather a "gentle" put down. Dimensions: inside Ø 16mm, outside Ø 35mm, pcs ärke 10mm

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The mirror set "Radical" from Highsider in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a joint on the mirror arm for the best rear view and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handlebar head up to joint = approx. 150mm, handle length joint up to threaded bolt = 30mm Delivery includes: 2 pieces (left and right) incl. adapter pieces for fastening

The mirror set "Racing" from Highsider in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a slightly blue-tinted mirror glass for optimal glare protection and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handle length = approx. 140mm & M8 right-hand thread Delivery includes: 2 pieces (left and right) including adapter pieces for fastening

The Cult-Werk radiator cover "Racing" is manufactured in 3D design and suitable for all Harley-Davidson Breakout models from 2018< /strong> as well as suitable for Harley-Davidson FXDR models from 2019 onwards! This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers. Two metal brackets and all fastening material are included in the scope of delivery, with which you can Radiator shroud is attached to the frame of the Breakout or FXDR. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 1 hour! The following two surface variants are available for this radiator cover: - Can be painted (minimal painting effort ' Äì the perfect surface condition! The cladding is delivered primed and only needs to be painted!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cladding shines in glossy black) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /strong>

The Cult-Werk front spoiler "Bobber" suitable for all Harley-Davidson Softail models from 2018 (Breakout, Fat Bob, Fat Boy, FXDR 114, Street Bob, Softail Slim, Low Rider, Standard, etc...)! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only needs to be screwed onto the supplied metal bracket. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The following two surface variants are available for this spoiler: - Painting available hig (Minimal painting effort because of perfect surface quality! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus saving Remove the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE PARTS APPROVAL WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side cover set "Racing" in two different versions (clean for airride or with cutout for damper adjustment) suitable for almost all Harley-Davidsons Softail models from 2018 onwards and of course also suitable for the FXDR 114 from 2019 onwards (on the FXDR the covers are absolutely necessary in conjunction with our rear conversion "Racing")! IMPORTANT: To mount the left side cover on the FXDR, an additional threaded retaining bracket is required to fasten the side cover √∂nen. You can find this bracket in our shop with the item number HD-UNI013 or directly here on the detail page under accessories items! These lids are an ABS plastic part and are CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! The side covers ÄûRacing‚Äú have been elaborately designed and create a cool and clean look after installation on your motorcycle! As with the original, the covers can be ordered with a cutout for damper adjustment or with a clean look for airride systems. The following two surfaces Variants of surfaces are available for this side cover set: - Can be painted (Minimal painting effort - because the surface is perfect! The side covers are delivered ready for painting and can in principle can be painted immediately!) - Glossy black (no need to be painted anymore - so you save the entire painting costs! Remove the protective film and the lids shine in glossy black!) < p>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !

The belt protector from Cult-Werk is delivered in black and gives your motorcycle a cool look. Suitable for all Harley-Davidson Softail models from 2018 onwards (except FXDR!!). All bores and frä The parts are milled on state-of-the-art 5-axis CNC machining centers and then the part is powder-coated black! The belt guard gives your motorcycle a sportier and more subtle look than the original part thanks to the frozen elements.

Cult-Werk carbon engine parts suitable for all Harley-Davidson Softail models from 2018 with a Milwaukee Eight engine (FXDR 114, Breakout 114, Breakout 117,  Fat Boy, Heritage, Heritage Classic, Softail Slim, Fat Bob, Sport Glide & Deluxe)! DOES NOT FIT: Low Rider, Low Rider S, Low Rider ST,  Street Bob, Softail StandardReal craftsmanship for Harley-Davidson enthusiasts: These carbon parts set standards in design and performance. Made from the highest quality carbon, they not only give your bike a distinctive look, but also save valuable weight. Each part is manufactured with precision and attention to detail to meet the highest standards. Experience the freedom of the road with less weight and more elegance.IMPORTANT: There is also an ignition cover mounted in the pictures, this is not included in the kit and is intended for use To illustrate what it can look like!