The rear conversion kit 'ÄûOld School‚Äú from Cult-Werk suitable for Harley-Davidson Softail is a real eye-catcher! Especially if you want to achieve a cool old-school look on your beloved motorcycle, this is the perfect kit for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! The fender can be installed in different lengths to remain T√úV compliant and then it can simply be shortened at the desired point when attaching it to the swingarm! IMPORTANT INFORMATION: The frame cover also hides everything under the swing saddle so that neither screw points, dampers nor cables can be seen! THE SADDLE will be shipped as shown in the raw part picture! Following Two surface variants are available for this front fender:- Can be painted (Minimal painting effort because perfect surface finish! The fender can be painted Delivered quickly and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black. nzend!) THE PARTS REPORT WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk front spoiler "Bobber" suitable for all Harley-Davidson Softail models from 2018 (Breakout, Fat Bob, Fat Boy, FXDR 114, Street Bob, Softail Slim, Low Rider, Standard, etc...)! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only needs to be screwed onto the supplied metal bracket. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The following two surface variants are available for this spoiler: - Painting available hig (Minimal painting effort because of perfect surface quality! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus saving Remove the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE PARTS APPROVAL WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries as well as greens and a milled plate including insert frame for ºfor the license plate. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from Year of construction 2018! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>

The swing saddle 'ÄûOld School'Äú with two seat halves covered in leather from Cult-Werk turns your motorcycle into a real eye-catcher! Especially if you want to achieve a cool old school look on your beloved motorcycle, this is the perfect part for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! IMPORTANT INFORMATION: We recommend Be sure to use our frame cover (HD-BRO126)! This means that the entire frame is hidden under the saddle so that neither screw points, shock absorbers nor cables are visible! If the original struts (e.g. for the original fender) are installed in conjunction with the saddle, the frame cover at the rear corners must be adjusted!

100% precisely fitting ABS plastic part - NO GRP! All existing holes and millings are milled on the most modern 5-axis CNC machining centers, so that the frame cover only needs to be installed. It greatly enhances your motorcycle, as all cables, screw points and the damper are concealed! The part is delivered in glossy black! (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) IMPORTANT INFORMATION: The frame cover should Can be used in conjunction with our swing saddle (HD-BRO125). If the frame cover is used with the original struts (e.g. for original fenders), you have to adjust the cover backwards at the corners!!

The Cult-Werk peg set "Racing" including foot pegs and shift pegs suitable for Harley-Davidson Softail models from 2018 to the present (NOT SUITABLE: for models with running boards)! The Footrests & The shift pegs were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests and the gearshift peg are attached to the motorcycle just like the original parts!

The Cult-Werk side cover set "Racing" in two different versions (clean for airride or with cutout for damper adjustment) suitable for almost all Harley-Davidsons Softail models from 2018 onwards and of course also suitable for the FXDR 114 from 2019 onwards (on the FXDR the covers are absolutely necessary in conjunction with our rear conversion "Racing")! IMPORTANT: To mount the left side cover on the FXDR, an additional threaded retaining bracket is required to fasten the side cover √∂nen. You can find this bracket in our shop with the item number HD-UNI013 or directly here on the detail page under accessories items! These lids are an ABS plastic part and are CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! The side covers ÄûRacing‚Äú have been elaborately designed and create a cool and clean look after installation on your motorcycle! As with the original, the covers can be ordered with a cutout for damper adjustment or with a clean look for airride systems. The following two surfaces Variants of surfaces are available for this side cover set: - Can be painted (Minimal painting effort - because the surface is perfect! The side covers are delivered ready for painting and can in principle can be painted immediately!) - Glossy black (no need to be painted anymore - so you save the entire painting costs! Remove the protective film and the lids shine in glossy black!) < p>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !