Wiring harness V2 (suitable for Harley-Davidson models: Touring)

Complete Cult-Werk rear conversion “Bagger” incl. mounting kit and lighting equipment suitable for Harley-Davidson Touring models from model year 2014 (Street Glide, Road Glide & Road King - also special versions as well as Ultra and Limited)!IMPORTANT: The rear conversion comes with a matching wiring harness incl. resistor for the correct flashing frequency and the original plug! The conversion is therefore absolutely PLUG AND PLAY! The original rear lights 3 in 1 as well as the license plate lighting of the models from 2024 is included in the kit!This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated modern 3-in-1 rear lights and license plate lighting for models from 2024!The “Bagger” rear fender has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then fit the ABS rear fender over the original metal fender and secure it with the original seat bench screws! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final installation of the ABS fender, the LED lights must be attached using the mounting brackets supplied and the license plate light must be inserted into the fender!The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - as the surface finish is perfect! The fender is supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)The following parts are included in the scope of delivery: - ABS rear fender - ORIGINAL 3in1 lighting units for Touring models from 2024 onwards - ORIGINAL license plate lights for Touring models from 2024 onwards - 2x holder for stiffening- 2x holder for lighting unit - Wiring harness incl. resistor and plug = plug and play - mounting material THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Complete Cult-Werk rear conversion “Bagger” incl. mounting kit and lighting equipment suitable for Harley-Davidson Touring models from model year 2014 (Street Glide, Road Glide & Road King - also special versions as well as Ultra and Limited)!IMPORTANT: The rear conversion comes with a matching wiring harness incl. resistor for the correct flashing frequency and the original plug! The conversion is therefore absolutely PLUG AND PLAY! The original rear lights 3 in 1 as well as the license plate lighting of the models from 2024 is included in the kit!This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated modern 3-in-1 rear lights and license plate lighting for models from 2024!The “Bagger” rear fender has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then fit the ABS rear fender over the original metal fender and secure it with the original seat bench screws! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final installation of the ABS fender, the LED lights must be attached using the mounting brackets supplied and the license plate light must be inserted into the fender!The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - as the surface finish is perfect! The fender is supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)The following parts are included in the scope of delivery: - ABS rear fender - ORIGINAL 3in1 lighting units for Touring models from 2024 onwards - ORIGINAL license plate lights for Touring models from 2024 onwards - 2x holder for stiffening- 2x holder for lighting unit - Wiring harness incl. resistor and plug = plug and play - mounting material THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!