The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

Suitable for all Harley-Davidson models with external dampers and 12mm piston rod (e.g. Sportster). With these universal suspension travel limiters (4 pieces) Cult-Werk allows the deflection travel of the rear shock absorbers to be limited. The big advantage of these travel limiters is that they are made of relatively soft rubber. When touching down, no hard impacts are caused, but rather a "gentle" landing takes place. This prevents any possible landing on the tire. Assembly only takes a few seconds because the limiters are only clipped onto the piston rod. It is not necessary to remove the dampers! Dimensions: Inside √ò 12mm, outside √ò 38mm, thickness 10mm

This pop-up tank cap in ultra-flat design with a right-hand thread and ventilation suitable for all Harley-Davidson tanks from 1996 onwards. (Dyna, Softail, Heritage, Fatboy, Touring etc. ...) (The exception is models that have a ventilation pipe in the tank neck, which rests against the locking of the pop-up function in the middle of the lid. It's best to check beforehand, the R may have to be used ötube can be flexed. Most of the time it is enough to move the locking pin on the side where it touches the tube a little so that it is flush with the guide there. Or you can Grind the split pin a little at both ends so that it doesn't protrude over the guide!) The special thing about the high-quality lid equipped with a seal is the retractable knurled screw with pop -Up function. If you press the closed tank cap with your thumb, the knurled screw can be recessed by turning it 90°. The lid is now ultra-flat and has a classic smooth look. Ma ße: external diameter 60 mm, height with countersunk knurled screw 36 mm, diameter of the knurled screw 38 mm, height of the knurled screw 9 mm. Thread diameter approx. 45 mm, thread depth approx. 28 mm

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - can be found in the shop with the item number HD-UNI016 - with Milling (the handles are delivered with the CWC logo milled into the end caps)

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - with milling (the handles are supplied with the CWC logo milled into the End caps supplied) - can be found in the shop with the item number HD-UNI017

The belt guard from Cult-Werk is delivered in black and suitable for all Harley-Davidson Dyna models from 2007 to 2017! It gives your motorcycle a cool look. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers and the part is then powder-coated black! The belt guard gives your Harley a sportier and more subtle look than the original part thanks to the milled elements.

The mirror set "Round" from Highsider in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! The elegant universal mirrors are very well adjustable thanks to various joints and are suitable for mounting above or below the handlebars. Come E-test mark therefore FREE OF REGISTRATION ! Product specifications: Diameter = 102mm, stem length to joint = 150mm & Handle length to threaded bolt: 180mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for fastening