These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2018 onwards (except Sport Glide) and cover the ends of the front axle on both sides of the front fork. The covers are inserted into the hollow axle on one side and into the hexagon socket on the other side and are secured using an O-ring. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with supplied with a frozen logo icon)

Complete Cult-Werk rear conversion “Bagger” incl. mounting kit and lighting equipment suitable for Harley-Davidson Touring models from model year 2014 (Street Glide, Road Glide & Road King - also special versions as well as Ultra and Limited)!IMPORTANT: The rear conversion comes with a matching wiring harness incl. resistor for the correct flashing frequency and the original plug! The conversion is therefore absolutely PLUG AND PLAY! The original rear lights 3 in 1 as well as the license plate lighting of the models from 2024 is included in the kit!This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated modern 3-in-1 rear lights and license plate lighting for models from 2024!The “Bagger” rear fender has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then fit the ABS rear fender over the original metal fender and secure it with the original seat bench screws! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final installation of the ABS fender, the LED lights must be attached using the mounting brackets supplied and the license plate light must be inserted into the fender!The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - as the surface finish is perfect! The fender is supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)The following parts are included in the scope of delivery: - ABS rear fender - ORIGINAL 3in1 lighting units for Touring models from 2024 onwards - ORIGINAL license plate lights for Touring models from 2024 onwards - 2x holder for stiffening- 2x holder for lighting unit - Wiring harness incl. resistor and plug = plug and play - mounting material THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Kompletter Cult-Werk Koffersatz passend für diverse Harley-Davidson Touring Modelle in schwarz glänzend mit passend gestickten Cult-Werk Inlets (Koffereinsätze). Im Lieferumfang sind folgende Teile enthalten:- Seitenkoffer in schwarz glänzend

Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material

Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024! License plate size:  W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! The plate comes with contour milling to pick up the milled elements of the CVO models! Included in delivery:- 1x milled license plate holder (glossy black)- 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - Mounting material

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024!V1 - All Black variant V2 - Black with contour milling License plate size:  W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material!  Included in delivery:- 1x black powder-coated license plate holder - 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - mounting material

Complete your Cult-Werk rear conversion Racing with our pillion footrest installation. This high-quality extension has been designed to fit our rear conversions perfectly and offers the passenger optimum comfort and stability. ATTENTION: Please specify which exhaust system is fitted!Perfect fit: Developed for seamless integration with our rear conversion racing systems. High-quality materials: Made from robust steel with a durable surface coating for maximum longevity. Easy installation: Plug-and-play system for straightforward installation without additional adjustments. Sporty design: Matches the dynamic look of your motorcycle perfectly and emphasizes the racing character. Scope of delivery: - 1 set of pillion footrest relocation (left and right) - mounting material

Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic). Milled and laser-cut from high-quality aluminum on state-of-the-art 5-axis machining centers. Its special highlight: an integrated inspection glass that offers a permanent view of the inner workings. This not only allows you to keep an eye on the condition of the inside at all times, but also gives your bike an unmistakable look. It can be easily replaced with the original part.

This is a pair of lighting units for our original center license plate holder suitable for Harley-Davidson Softail models. The units are supplied incl. permanently mounted 3in1 LED lighting and can be used to convert the center bracket to direct lighting at a later date!

Complete Cult-Werk rear fender "Bagger" V1 incl. mounting kit suitable for Harley-Davidson models: Touring CVO from 2023 & Touring from 2024   The rear fender is plug & play and must be fitted over the original. The original rear lights can still be used as well as the original license plate light!   This Cult-Werk rear fender is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and indicators.   The rear fender "Bagger" V1 has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame.   The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)   The following parts are included in the scope of delivery: - ABS rear fender - mounting material - 2x brackets for reinforcement

Complete Cult-Werk rear conversion kit "Bagger" V1, including rear fender with cut-out for original rear lights, long case and side cover set suitable for Harley-Davidson Touring models Touring - CVO models from 2023 and Touring models from 2024! ATTENTION: THE LIDS FROM THE ORIGINAL SIDE CASES DO NOT FIT THE SIDE CASES INCLUDED IN THE KIT, WHICH MEANS THAT THE REAR SPEAKERS MUST BE REMOVED! (CVO MODELS) With this kit, the original rear lights and the original license plate lighting are reused without changing the connection.   This Cult-Werk KIT consists of several ABS plastic parts and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface!   The excavator kit V1 has a very elaborate design! The Cult-Werk rear end is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and routing of the wiring harness must be carried out.   The following two surface variants are available for this rear conversion: - Paintable (ATTENTION: Cases are always delivered in glossy black!!!! Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (does not need to be painted - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)   The following parts are included in the scope of delivery: - ABS rear fender - Side case in glossy black - Mounting material (mounting bracket for rear lights) - 2x brackets for reinforcement

The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting Translated with DeepL.com (free version)

The "Wave" mirror set in black gives your motorcycle a super cool look. Small color accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC-milled lines of the housing create both a modern and a classic look. WITH EC / ABE - E-approved!Product specifications: Head width = 124 mm, head height = 86 mm, total width: 225 mm, total height: 175 mm Handlebar length: 55 mm to the bend, then 130 mm to the joint and another 40 mm to the threaded bolt, (without adapter 29 mm)Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard Germany license plates) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

This is a pair of end caps V2 for our original Cult-Werk crash bars. Supplied with black aluminum end caps in black with subsequent "Cult-Werk Clubstyle" design milling. These caps are perfect in combination with the golden spacers to achieve a high-quality clubstyle look on the motorcycle! Scope of delivery: 2 pieces / milled black Length: 45mm

This is a pair of V1 end caps for our original Cult-Werk crash bars. Supplied with black plastic end caps in black which serve as "pomps" for the crash bar in the event of a fall! Scope of delivery: 2 pieces / black Length: 50mm

This is a pair of spacers for our original Cult-Werk crash bars. They are supplied in gold anodized and can be mounted on the crash bar as an eye-catcher for the perfect look! Scope of delivery: 2 pieces / gold anodized Thickness: 15mm

The original Cult-Werk "Clubstyle" crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black milled aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

The original Cult-Werk "Clubstyle" X1 crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for our central license plate holder (HD-BRO078 & HD-BRO079)! Also perfect for use with other holders. The exact dimensions below.Product specifications: Length = 43mm x width = 10mm x height = 12mm Thread spacing f ür Fastening = 27mm Cable length = 250mm Scope of delivery = 1 piece E-test mark

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

The Cult-Werk pillion footrests "Racing" (2 pieces as shown) suitable for Harley-Davidson Softail  2-seater models from 2018 to current! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

With this kit from Cult-Werk suitable for all Harley-Davidson Low Rider S models from 2022 onwards the speedometer can be relocated to the original headlight mask! The offset can only be used in conjunction with a new handlebar clamp, such as: HD-SPO029! It is made of steel and then powder-coated in glossy black! No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the holder replaces the original holder of the mask and the mask can then be attached to the new holder again! A cover is included for the speedometer, which serves as splash protection from below and for fastening!

Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, lighting and genuine leather seat suitable for Harley-Davidson Breakout models from 2013 to 2017! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the lighting provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Lighting equipment - Real leather seat and pillion pad (depending on selection) - Mounting material- 2x suspension travel limiters THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The original Cult-Werk side cover set "Custom" suitable for all Harley-Davidson Touring ST models up to model year 2023! (Road Glide ST & Street Glide ST) The covers are ABS plastic parts and are CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. They are not cheap GRP! All assembly material is supplied for fitting the set and they can be replaced with the original small side covers in just a few minutes! This results in a nice continuous line up to the cases.The following two surface variants are available for these side covers: - Paintable (Minimal painting effort - as the surface finish is perfect! The side covers are supplied ready for painting and can be painted immediately) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the side covers shine in glossy black!) THE INSTALLATION INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!