The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2024 onwards for a sportier look. It is Shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2024 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for Harley-Davidson Sportster S models from 2021 onwards. IMPORTANT: It is absolutely necessary to close the cat's eyes on the fork Remove so that the fork can freely dip into the cover! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed to the original mounting points for the front fender. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated in matt black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!

Suitable for all Harley-Davidson FXDR models from 2019 onwards as well as for other models with 55mm fork legs. The clip-on handlebars from Cult-Werk can be installed at two different heights by simply turning them! Our clip-on handlebars are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated matt black. This ensures absolutely the highest quality! Installation is very easy, as the handlebars are simply replaced with the original ones and then the handlebar tubes with all switches and handles are screwed back on! The clip-on handlebars do not have EC / ABE!! All parts required for assembly are included!

Suitable for Harley-Davidson FXDR, Low Rider S and Fat Bob models from 2018 onwards. IMPORTANT: It is absolutely necessary to remove the cat eyes on the fork so that the fork can move freely can immerse yourself in the covers! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed together with the brake calipers. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!

The Cult-Werk side license plate holder with GT√ú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Dyna models (Street Bob, Street Bob Special, Low Rider, Wide Glide, Fat Bob & Switchback) from the year of manufacture 2008 to the last year of manufacture 2017! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2- 1x anti-twist device using a worm screw - 4x screws including nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE TAB "DOWNLOADS" PROVIDED!!!

ATTENTION - SEAT SHELL WITHOUT COVER!100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the Cult-Werk rear fender only needs to be exchanged for the original rear fender. The rear fender is top-notch, fits perfectly and provides a clear view of the rear wheel. Original fit - super cool retro style. After assembly, the suspension travel must be checked! If necessary, the spring travel must be limited accordingly using a spring travel limiter (article number: HD-UNI033)! THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! strong>

The Cult-Werk rear fender ÄûBobber‚Äú black-glossy with finished surface. You no longer have to have the rear fender painted! This rear fender is designed so that it sits approx. 50mm closer to the tire, so you save yourself having to lower the Sportster and the distance between the fender and tire is reduced, creating a super cool look! Optically designed like the original rear fender, but shortened to the maximum so that the frame does not have to be shortened. Also suitable for 180 rear tires without modifications! The original fender struts are still used as is the splash guard. 100% precisely fitting ABS plastic part - NOT GRP! The rear fender is provided with a protective film so that no scratches can occur on the surface. Please remove the film after or shortly before installation. No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the rear fender only needs to be replaced with the original rear fender. The rear fender is top-notch, fits perfectly and provides a clear view of the rear wheel. Original fit - super cool bobber style! IMPORTANT INFORMATION: - The fender is also available in a paintable version! This means it comes with a perfectly primed surface for the painter. (Item number: HD-SPO003) - The fender can only be used in conjunction with a very short single seat (single seat not possible from Sportster 2016) or with one of our swing saddles (Item number: HD-SPO068 & ; HD-SPO069)- The fender is not suitable for pillion riding as it would not support the weight due to the material (high-quality ABS plastic)!! THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE TAB "DOWNLOADS" PROVIDED!!!

This rear fender from Cult-Werk is designed to sit approx. 50mm closer to the tire! This saves you having to lower the Sportster and the distance between the fender and the tire is reduced - this also creates a super cool look! 100% precisely fitting ABS plastic part - NO GFK! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the rear fender only needs to be replaced with the original rear fender. The rear fender is top-notch, fits perfectly and provides a clear view of the rear wheel. Original fit - super cool retro style. The struts have to be shortened for assembly - we then recommend the short fender struts from Cult-Werk to fix everything again ∂n to dress up! After installation, the spring travel must be checked! If necessary, the spring travel must be limited accordingly with a spring travel limiter (item number: HD-ROD048)! IMPORTANT INFORMATION: - The fender is also available in painted finish Highly available! The fender therefore comes with a perfect surface for the painter. (Item number: HD-SPO005) - The fender can only be used in conjunction with a very short single seat (single seat not possible from Sportster 2016) or with one of our swing saddles (Item number: HD-SPO068 & ; HD-SPO069) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk fork caps suitable for all Harley-Davidson Breakout models from 2018! They cover the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! Colour: black-glossy powder-coated, scope of delivery: 2 pieces The following two Versions are available for these fork caps: - without milling (the caps are delivered in pure black) - with milling (the caps are also milled §stem logo icon supplied)

All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the Cult-Werk rear fender only needs to be exchanged for the original rear fender. The rear fender is TOP processed and fits perfectly. After installation, the spring travel must be checked! If necessary, the spring travel must be limited accordingly using a spring travel limiter (item number: HD-UNI033)! IMPORTANT INFORMATION: - The fender is also available in paintable versions. old! This means it comes with a perfectly primed surface for the painter. (Item number: HD-SPO072) - The fender can only be used in conjunction with a very short single seat (single seat not possible from Sportster 2016) or with one of our swing saddles (Item number: HD-SPO068 & ; HD-SPO069)- The fender is not suitable for pillion riding as it would not support the weight due to the material (high-quality ABS plastic)!! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB √ACCESS PROVIDED!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk fork caps suitable for Harley-Davidson Street Bob, Softail Standard and Fat Boy models from 2018! They cover the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Colour: black-glossy powder-coated, scope of delivery: 2 pieces The following two Versions are available for these fork caps: - without milling (the caps are delivered in pure black) - with milling (the caps are also milled §stem CWC logo delivered)

The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

Suitable for all Harley-Davidson Breakout models from 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the upper fork tubes between the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Assembly is very simple, the cover is simply pushed over the fork tube and screwed tight. All parts required for assembly are included in the kit!

The swingarm covers (left + right) in black from Cult Werk, suitable for all Harley-Davidson V-Rod, Muscle and Street Rod models. These covers hide the swing axle in the swing arm and thus ensure a clean and clean look. For models of this year, a curved cover is supplied for the left side because the nut of the swing axle protrudes slightly over the swing arm. Perfect fit and absolutely highest quality! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then glossy black powder coated. Very easy to assemble, the covers are just plugged into the swing arm, center themselves and are fixed using an O-ring. Delivery included: 2 pieces

The Cult-Werk clutch and brake cylinder cover suitable forHarley-Davidson Touring models from 2014 with hydraulic Clutch!The covers are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring covers. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk lid. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it üfrozen for the seal, which are still needed! The covers are approx. 25mm higher than the original covers and were milled very elaborately. Different levels, recesses and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look!< /p>

The Cult-Werk headlight kit "CVO Style" suitable for all Harley-Davidson Breakout models from 2013 to 2017 gives the motorcycle the popular look of the Harley-Davidson Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker"< will be available to you /strong> supplied with the look of the V-Rod / Night Rod. The headlight must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. THE ASSEMBLY INSTRUCTIONS AS WELL AS THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>

The fork cover "Long Version" from Cult-Werk hides the fork tubes at the top between the two fork clamps and is suitable for all < strong>Harley-Davidson Nightster models from 2022 onwards if the original indicator holders are removed. This makes the entire fork appear beefier and all of the chrome is also hidden. The covers are made of high-quality aluminum that is machined and milled on state-of-the-art 5-axis machining centers! This guarantees absolutely the highest quality! Installation is very simple, the cover is simply pushed over the fork tube and screwed tight. Colour: matt black textured powder-coated, scope of delivery: 2 pieces

The Cult-Werk speedometer holder moves the speedometer from the handlebars to the left side of the tank - super cool look! The indicator light unit is also mounted on the speedometer holder. There is no need to change anything about the cables. CNC lasered and black powder-coated! IMPORTANT INFORMATION: Please be sure to use screw locking during assembly! Otherwise, the screws may come loose due to strong engine vibrations!

100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the Cult-Werk front spoiler only needs to be screwed onto the metal bracket provided. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The front spoiler is available in paintable or with a finished surface in glossy black. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

With this 2-piece fork cover kit from Cult-Werk you can hide the upper fork tubes between the fork clamps. This means that the chrome-plated fork tubes are covered and the entire fork appears beefier and completely black. Suitable for all Harley-Davidson V-Rod, Night Rod and Night Rod Special models! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very easy, the cover is just pushed over the fork tube and screwed tight.

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Sportster models! (IMPORTANT: The holder is 100% suitable for Sportster models from the year 2000 onwards. For older models, please check beforehand whether the model is listed based on the area of use so that no problems arise when registering!) /p> Since the unsprung masses of Sportster models are particularly high, many of the license plate holders available on the market break. The silent block reduces these to a minimum and a long service life is guaranteed! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) Assembly is very easy , the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x pan head screw, similar. ISO7380 ¬Ω‚Äú-20UNFx3.5‚Äú, 10.9 - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

This Cult-Werk headlight mask "Bad Look" is suitable for all Harley-Davidson Touring Road Glide‚Ñ¢ models from 2015 (Road Glide‚Ñ¢, Road Glide‚Ñ¢ Special, Road Glide‚Ñ¢ Ultra & CVO‚Ñ¢ Road Glide‚Ñ¢). The mask is an ABS plastic part and is milled on the most modern 5-axis CNC machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which in turn saves costs because it is a perfect surface and no preparation or reworking of the parts is required! To assemble the headlight mask: This basically gets stuck in the Fehring by itself. Nevertheless, a high-quality assembly adhesive is included with which the mask is glued to the headlight at four adhesive points. Important: The glue should dry for 12 hours at room temperature (see application images in the product images)! The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

This 2-piece fork cover kit from Cult-Werk covers the upper chrome-plated fork tubes and is suitable for all Harley-Davidson Dyna models from 2007 to 2017. The entire fork appears beefier and completely black ! Milled from high-quality aluminum on the most modern 5-axis machining centers. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

100% precisely fitting ABS plastic part - NO GRP! All existing holes and millings are milled on the most modern 5-axis CNC machining centers, so that the Cult-Werk frame cover only needs to be installed. Greatly enhances your Sportster! The part is delivered in glossy black! (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) IMPORTANT INFORMATION: The frame cover should can be used in conjunction with our swing saddles and two more holes must be drilled during assembly for the base plate of the saddles!! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB √úGIVEN!!!

The front fender from Cult-Werk suitable for Harley-Davidson Fat Boy models from 2018 gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! The fender therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It is TOP processed, fits perfectly and makes the view better onto the front wheel. Original fit - new design. The following two surface variants are available for this front fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) THE PARTS REPORT IS AVAILABLE IN THE "DOWNLOADS" TAB!!!

The short belt guard from Cult-Werk is delivered in black and gives your motorcycle a cool look. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers and the part is then powder-coated black!

Suitable for all Harley-Davidson Breakout models from 2013 to 2017. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This fork cover kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!

The indicator holders from Cult-Werk are screwed together with the fork bridge screw. This means that the indicator is mounted nicely hidden and the arrangement of the indicators is also T√úV compliant. CNC lasered. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

ATTENTION! The Struts from Cult-Werk are delivered in glossy black! This means you no longer have to paint the fender struts! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! These covers are needed when the struts (i.e. the frame) for some of our fenders are shortened in the middle towards the back! All drilling and milling are state-of-the-art 5-axis CNC machining centers milled so that the fender struts only need to be screwed on. The Fender Struts are TOP processed and fit perfectly. Original look - only in the short version! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The rear Cult-Werk indicator holders are screwed together with the screw of the shock absorber. CNC milled, black powder coated. Suitable for Harley-Davidson V-Rod, Night Rod Special and universally applicable on all motorcycles, with shock absorber attachment using an M12 screw. Can be combined with all common indicators, e.g. from Kellermann! Scope of delivery: 2 indicator holders (left/right), black powder-coated

The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards for a sportier look. It is Shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

Very flat design, also fits in conjunction with drag bar handlebars! The Cult-Werk fork caps cover the fork tubes (chrome) above the fork clamp. The caps are securely fastened with a hidden set screw. Made of high-quality aluminum, milled on the most modern 5-axis machining centers. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

Suitable for all Harley-Davidson Breakout models from 2018 onwards. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!