The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

This lockable fuel cap from Cult-Werk is suitable for all V-Rod, Night Rod Special, Muscle & Street rod models. Like the original, the tank cap is made of black plastic and includes 2 keys. Since the seat cannot be locked, it is almost necessary to install a lockable tank cap!

The Cult-Werk air filter cover suitable for V-Rod,  Night Rod Special & Muscle. This kit is required for all airbox covers with an integrated speedometer unit. The Cult-Werk air filter cover kit consists of 2 parts, an extremely flat cover for the air filter itself and a very flat air filter box upper part. Made of ABS plastic, Milled on the most modern 5-axis CNC machining centers, no adjustment work required. The clips are simply clipped into the new air filter box top - like original. The hole for the sensor is also available (see also pictures below). A supplied adapter piece guarantees easy installation and a perfect hold of the sensor. It is very important that the air filter box is properly closed again, otherwise there will be water and too much air or dust can penetrate into the air filter box, which in turn can cause damage to the engine!!! DAS PARTS CERTIFICATES WILL BE AVAILABLE IN THE “DOWNLOADS” TAB!!!

The Cult-Werk fork bridge screw kit in black suitable for all Harley-Davidson V-Rod + Night Rod Special models. These fork bridge screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black fork the finishing touch. 4 pieces, 2 pieces each for the upper triple clamp and 2 pieces for the for the lower triple clamp. Since the screws are not painted or coated, there is no flaking when tightened,– simply permanently beautiful! Material: high-strength steel, black galvanized

The Cult-Werk fender bolt kit in black suitable for all Harley-Davidson V-Rod + Night Rod Special models. These fender screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black front the finishing touch. 4 pieces, 2 pieces per side. Since the screws are not painted or coated, there is no flaking when screwed tight, simply permanently beautiful! Material: high-strength steel, black galvanized

The mirror set 'ÄûRadical'Äú from Cult-Werk in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a joint on the mirror arm for the best rear view and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handlebar head up to joint = approx. 150mm, handle length joint up to threaded bolt = 30mm Delivery includes: 2 pieces (left and right) incl. adapter pieces for fastening

The mirror set ÄûRacing‚Äú from Cult-Werk in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a slightly blue-tinted mirror glass for optimal glare protection and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handle length = approx. 140mm & M8 right-hand thread Delivery includes: 2 pieces (left and right) including adapter pieces for fastening

The Cult-Werk fender bolt kit in black suitable for all Harley-Davidson V-Rod + Night Rod Special models. Suitable for upside-down forks. Especially with a short head, so the screw sits flush. These fender screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black front the finishing touch. 4 pieces, 2 pieces per side. Since the screws are not painted or coated, there is no peeling when screwed tight - simply permanently beautiful! Material: high-strength steel / black galvanized

Suitable for all Harley-Davidson models with external dampers and 12mm piston rod (e.g. Sportster). With these universal suspension travel limiters (4 pieces) Cult-Werk allows the deflection travel of the rear shock absorbers to be limited. The big advantage of these travel limiters is that they are made of relatively soft rubber. When touching down, no hard impacts are caused, but rather a "gentle" landing takes place. This prevents any possible landing on the tire. Assembly only takes a few seconds because the limiters are only clipped onto the piston rod. It is not necessary to remove the dampers! Dimensions: Inside √ò 12mm, outside √ò 38mm, thickness 10mm

The fork bridge screws (set of 5) from Cult-Werk in black suitable for all Harley-Davidson Muscle, Night Rod Special models. These fork bridge screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black fork the finishing touch. 5 pcsück = 1 pcück fà for the upper fork bridge and 4 pieces for the lower fork bridge. Since the screws are not painted or coated, there is no flaking when tightened, simply permanently beautiful! Material: high-strength steel / black galvanized

The headlight or lamp mask lowering kit from Cult-Werk fits all Harley-Davidson V-Rod and Night Rod Special models. This kit is reduced öallows for a lowering of the headlight including the mask of all Night Rod Special models. Since the headlight including mask sits approx. 45mm lower, the bike looks significantly lower and beefier! The kit is simply mounted between the upper fork clamp and the mask. The holder made of 3mm thick steel (CNC lasered and folded) ensures a firm and secure hold without wobbling! No changes to the cables are necessary. No adjustment work (drilling, etc.) is necessary! Plug and play! Total assembly time is max. 5 minutes! It's only 4 screws. As mentioned, the holder is CNC lasered and folded and then powder-coated black! Required assembly materials including assembly instructions are included!

The 'ÄûCustom'Äú mirror set from Cult-Werkin black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a slightly gray tinted mirror glass for optimal glare protection and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handle length = approx. 140mm & M8 right-hand thread Delivery includes: 2 pieces (left and right) including adapter pieces for fastening

The Cult-Werk peg set "Racing" including foot pegs and shift peg suitable for Harley-Davidson V-Rod / Night Rod & Muscle models of all years! The foot pegs and the shift peg were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, elaborately designed rubbers with Cult-Werk lettering were produced to ensure a perfect hold and to round off the set visually perfectly! The footrests and the gearshift peg are attached to the motorcycle just like the original parts!

This pop-up tank cap in ultra-flat design with a right-hand thread and ventilation suitable for all Harley-Davidson tanks from 1996 onwards. (Dyna, Softail, Heritage, Fatboy, Touring etc. ...) (The exception is models that have a ventilation pipe in the tank neck, which rests against the locking of the pop-up function in the middle of the lid. It's best to check beforehand, the R may have to be used ötube can be flexed. Most of the time it is enough to move the locking pin on the side where it touches the tube a little so that it is flush with the guide there. Or you can Grind the split pin a little at both ends so that it doesn't protrude over the guide!) The special thing about the high-quality lid equipped with a seal is the retractable knurled screw with pop -Up function. If you press the closed tank cap with your thumb, the knurled screw can be recessed by turning it 90°. The lid is now ultra-flat and has a classic smooth look. Ma ße: external diameter 60 mm, height with countersunk knurled screw 36 mm, diameter of the knurled screw 38 mm, height of the knurled screw 9 mm. Thread diameter approx. 45 mm, thread depth approx. 28 mm

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - can be found in the shop with the item number HD-UNI016 - with Milling (the handles are delivered with the CWC logo milled into the end caps)

The Cult-Werk footrests "Racing" (2 pieces as shown) suitable for Harley-Davidson V-Rod / Night Rod & Muscle models of all years! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

The Cult-Werk clutch and brake cylinder cover suitable for Harley-Davidson V-Rod, Night Rod and Night Rod Special models from the year of construction 2007 to 2017! The lids are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring lids. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk lid. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it üfrozen for the seal, which are still needed! The lids are approx. 25mm higher than the original lids and were milled very elaborately. Different levels, depressions and different radii make them appear extremely 3-dimensional and thus give your motorcycle a more aggressive and high-quality look!

This 1" drag bar handlebar in black is 3x perforated for cable routing and comes with a T√úV partial certificate. It is 820 mm wide and suitable for Harley-Davidson models from the year of manufacture 1984. The cables and lines do NOT need to be extended! The handlebars were installed on almost all Cult-Werk bikes, see pictures.

This lowering kit from Cult-Werk is suitable for the Cult-Werk rear fender "Racing" and offers a cheap alternative to the very expensive Air-Ride. Suitable for V-Rod, Night Rod, NRS & Muscle. This kit is a spacer that is screwed in between the lower shock absorber mounting screw. This means that the shock absorber is at an angle and this makes the bike approx. 35mm lower. The lowering kit is CNC lasered and powder coated black. The required assembly material + 4 spring travel limiters are of course included in the delivery. Assembly time approx. 15 minutes, without T√úV. 1 set = 2 pieces! If rear axle covers (not original) were subsequently installed on the motorcycle, they will have to be modified slightly.

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - with milling (the handles are supplied with the CWC logo milled into the End caps supplied) - can be found in the shop with the item number HD-UNI017

The mirror set 'ÄûRound'Äú from Cult-Werk in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! The elegant universal mirrors are very well adjustable thanks to various joints and are suitable for mounting above or below the handlebars. Come E-test mark ‚Äì therefore FREE OF REGISTRATION ! Product specifications: Diameter = 102mm, stem length to joint = 150mm & Handle length to threaded bolt: 180mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for fastening

These risers from Cult-Werk are CNC milled from high-strength aluminum on state-of-the-art 5-axis machining centers. You can use these risers for the original as well as for all other 1-inch accessories handlebars. The height of the risers is 45mm - they are installed on all Cult-Werk bikes (see pictures)! Black anodized including mounting material, the M10 screws included are also included Black anodized to ensure a perfect look! These risers fit exactly on all V Rod, Night Rod, NRS and Mucsle models! It is NOT necessary to drill out the fork bridge!!! You can find the matching 1 inch handlebar for this riser here in the shop. Item number: HD-UNI025

The  Cult-Werk shift peg "Racing" suitable for Harley-Davidson Sportster models from 2004 onwards, V-Rod / Night Rod / Muscle models, Softail models from 2018 onwards as well as touring models! The shifter was milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the product visually perfectly! The shift peg is simply replaced with the original part and attached to the motorcycle!

This 1" drag bar handlebar in black makes your motorcycle deep and wide and comes with a T√úV partial certificate. It is 820 mm wide and fits Harley-Davidson models from 1984 onwards. The cables and lines DO NOT need to be extended! The handlebars were installed on almost all Cult-Werk bikes, see pictures.