The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

Suitable for Harley-Davidson Sportster S models from 2021 onwards. IMPORTANT: It is absolutely necessary to close the cat's eyes on the fork Remove so that the fork can freely dip into the cover! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed to the original mounting points for the front fender. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated in matt black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!

Suitable for all Harley-Davidson Sportster S models from 2021 and Nightster models from 2022! CNC milled/lasered, knurled and then black powder-coated. Can be combined with all common indicators, e.g. from Kellermann, Shin-Yo, etc. ...! The holders are mounted on the handle fittings and screwed into the handle clamp!

The front fender from Cult-Werk suitable for Harley-Davidson Sportster S models from 2021 for a sportier look. The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It has TOP workmanship, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this front fender: - Paintable (Minimal painting effort "Äì the perfect surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save yourself the entire cost Painting costs! Remove the protective film and the fender shines in glossy black!) THE PARTS REPORT WILL BE AVAILABLE IN THE “DOWNLOADS” TAB!!!

The front fender from Cult-Werk suitable for Harley-Davidson Sportster S models from 2021 gives a sportier look. The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It has TOP workmanship, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this front fender: - Paintable (Minimal painting effort "Äì the perfect surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save yourself the entire cost Painting costs! Remove the protective film and the fender shines in its original glossy black!)  THE PARTS CERTIFICATE WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk lighting unit excl. LED lighting suitable for Harley-Davidson Sportster S models from 2021 onwards!! The holder, on the outside, any LED 3-in-1 lighting can be attached with an M8 thread, was made of steel and then finished in glossy black. powder coated. The lighting unit is required if you remove the original lighting bracket and use a side license plate holder. The holder is screwed to the original mounting points in the rear section using the mounting material provided. Then you have to do the wiring of the LED lighting that you want to use! THE INSTALLATION INSTRUCTIONS WILL BE IN THE DOWNLOADS TAB PROVIDED!!!

The Cult-Werk headlight mask "NRS Style" suitable for all Harley-Davidson Sportster S models from 2021 is based on the popular look of the Harley-Davidson V-Rod / Night Rod and . The original Sportster S LED headlight remains and will continue to be used in conjunction with the kit. In conjunction with the headlight mask, which is made of high-quality ABS plastic (not GRP!!!), you will receive a CNC-lasered headlight bracket from us that supports the new mask. This creates an even more aggressive look and makes the motorcycle appear lower and longer. No changes to the original cables are necessary! All holes required for attaching the mask are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted to optimally adjust the headlight range. The following two surface variants are available for this headlight mask:< /strong> - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately! - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk headlight kit "NRS Style" including LED headlights suitable for all Harley-Davidson Sportster S models from 2021 onwards gives the motorcycle the popular look of the Harley -Davidson V-Rod / Night Rod and . The kit also includes the LED headlight, thus removing the original narrow LED headlight of the Sportster S. In conjunction with the headlight mask, which is made of high-quality ABS plastic (not GRP!!!), you will receive a CNC-lasered headlight bracket from us that supports the LED headlight and the mask. This creates an even more aggressive look and the motorcycle looks lower and longer. The LED headlight must be soldered to the original headlight wiring harness! All of the holes required for attaching the mask are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted to optimally adjust the headlight range. The following two surface variants are available for this headlight mask:< /strong> - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately! - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for allHarley-Davidson Sportster S models from 2021 including GTü parts certificate! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for Netherlands) The assembly is Very simple, the license plate holder is attached to the swingarm at the top hole of the original lighting bracket. A suitable screw is required, which is of course included in the scope of delivery! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M8 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk LED lighting set 3in1 including holder suitable for Harley-Davidson Sportster S models from 2021 onwards!! The holder on the outside contains the LED 3in1 lighting including E -Approval mark was made of steel and then glossy black. powder coated. The lighting unit is required if you remove the original lighting bracket and use a side license plate holder. The holder is screwed to the original mounting points in the rear section using the mounting material provided. The LED lighting must then be wired! The license plate holder for allHarley-Davidson Sportster S models from 2021 including GTü parts certificate ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for Italy ) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) The assembly is very easy, the license plate holder is attached to the swingarm at the top hole of the original lighting bracket. A suitable screw is required, which is of course included in the scope of delivery! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M8 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

These axle covers from Cult-Werk are suitable for all Harley-Davidson Sportster S models from year 2021 with the original axle and cover them on both sides. The covers are placed over the axle and over the nut and clamped with set screws. This results in a clean and clean look. Made from high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: matt black powder-coated, scope of delivery: 2 pieces

License plate holder witha milled plate including insert frame for the license plate. Suitable for allHarley-Davidson Sportster S models from 2021 including GTü partial report! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) other sizes with insert frames will follow... The assembly is very easy, the license plate holder is included of the swing arm attached to the top hole of the original lighting bracket. A suitable screw is required, which is of course included in the scope of delivery! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M8 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk LED lighting set 3in1 incl. holder suitable for Harley-Davidson Sportster S models from 2021 onwards!! The holder on the outside contains the LED 3in1 lighting incl. The E-mark was made of steel and then glossy black. powder coated. The lighting unit is required if you remove the original lighting bracket and use a side license plate holder. The holder is screwed to the original mounting points in the rear section using the mounting material provided. The LED lighting must then be wired! THE ASSEMBLY INSTRUCTIONS ARE AVAILABLE IN THE "DOWNLOADS" TAB! !!

These axle covers from Cult-Werk are suitable for all Harley-Davidson Sportster S models built from 2021 and Nightster models from 2022 and cover the ends of the front axle on both sides of the front fork. The covers are inserted into the hollow axle on one side and into the hexagon socket on the other side and are secured using an O-ring. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Colour: matt black powder-coated, scope of delivery: 2 pieces The following two versions üGuides are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are also milled stem logo supplied)

The Cult-Werk foot pegs "Racing" (2 pieces as shown) suitable for Harley-Davidson Softail models from 2018 to current (NOT SUITABLE: for models with running boards), Nightster models from 2022 & Sportster S models from 2021!The footrests were milled from an aluminum part and then powder-coated in glossy black. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

The Cult-Werk LED lighting set 3in1 including holder suitable for Harley-Davidson Sportster S models from 2021 onwards!! The holder on the outside contains the LED 3in1 lighting including E -Approval mark was made of steel and then glossy black. powder coated. The lighting unit is required if you remove the original lighting bracket and use a side license plate holder. The holder is screwed to the original mounting points in the rear section using the mounting material provided. The LED lighting must then be wired! The license plate holder witha milled plate including an insert frame for the license plate. Suitable for allHarley-Davidson Sportster S models from 2021 including GTü partial report! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) other sizes with insert frames will follow... The assembly is very simple, the license plate holder is attached to the swing arm at the top hole of the original lighting bracket attached. A suitable screw is required, which is of course included in the scope of delivery! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M8 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk "Racing" shift peg suitable for Harley-Davidson Sportster S models from 2021! The shifter was milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the product visually perfectly! The shift peg is simply replaced with the original part and attached to the motorcycle!

The swingarm covers in matt black powder-coated from Cult-Werk, suitable for all Harley-Davidson Sportster S models from Year of manufacture 2012.These covers cover the screw points on the left and right front of the swing arm and thus ensure a clean and clean look. The covers are supplied with an O-ring and are therefore simply pressed into the opening! Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated matt black. Perfect fit and absolutely highest quality!