The Cult-Werk headlight kit "Night Rod Style" suitable for all Harley-Davidson Breakout models from 2025 gives the motorcycle the popular look of the Harley-Davidson Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker" will be available to you. Supplied with the look of the V-Rod / Night Rod. This must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort, because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save all the painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Complete your Cult-Werk rear conversion Racing with our pillion footrest installation. This high-quality extension has been designed to fit our rear conversions perfectly and offers the passenger optimum comfort and stability. ATTENTION: Please specify which exhaust system is fitted!Perfect fit: Developed for seamless integration with our rear conversion racing systems. High-quality materials: Made from robust steel with a durable surface coating for maximum longevity. Easy installation: Plug-and-play system for straightforward installation without additional adjustments. Sporty design: Matches the dynamic look of your motorcycle perfectly and emphasizes the racing character. Scope of delivery: - 1 set of pillion footrest relocation (left and right) - mounting material

Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic). Milled and laser-cut from high-quality aluminum on state-of-the-art 5-axis machining centers. Its special highlight: an integrated inspection glass that offers a permanent view of the inner workings. This not only allows you to keep an eye on the condition of the inside at all times, but also gives your bike an unmistakable look. It can be easily replaced with the original part.

The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

The Cult-Werk pillion footrests "Racing" (2 pieces as shown) suitable for Harley-Davidson Softail  2-seater models from 2018 to current! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2018 until 2022! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!

The air filter cover „Racing“ from Cult-Werk suitable for all Harley-Davidson Softail models from 2018 with Millwaukee-Eight 114 engine as well as Touring models from 2021 with Millwaukee-Eight 114 and turns the ugly original air filter into a style element! This saves you a new air filter and also the TÜV registration. The cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this air filter cover : - Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy änzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with folding gaiters suitable for Harley-Davidson Breakout models from 2018 onwards. With this kit from Cult-Werk you can cover the fork tubes above , between and below the fork bridges. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with CWC logo milled, 2x upper fork covers & 2x lower fork covers) - Kit with folding linings (2x fork caps with CWC logo milled, 2x Upper Fork Cover & 2x 49mm Folding Bälge)

The Cult-Werk headlight mask "V-Rod Style" suitable for all Harley-Davidson Breakout models from 2018 until 2024 & gives your motorcycle the popular look of the Harley-Davidson V-Rod / Night Rod. The original Breakout 2018 LED headlight remains and will continue to be used in conjunction with the kit. In conjunction with the headlight mask, which is made of high-quality ABS plastic (not GRP!!!), you will receive a CNC-lasered headlight bracket from us, which lowers the headlight and ensures a perfect fit. This creates an even more aggressive look and makes the Harley appear lower and longer. The speedometer remains in the original position! No changes to the original cables are necessary! All holes required for attaching the mask are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted to optimally adjust the headlight range. The following two surface variants are available for this headlight mask:< /strong> - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Black glossy nzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) < strong> THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

Suitable for all Softail models from 2018 with monoshock damper and 16mm piston rod! With this universal suspension travel limiter from Cult-Werk, the deflection of the limit the rear shock absorber. The big advantage of this travel limiter is that it is made of relatively soft rubber. This means that when you put it on, no hard bumps are caused, but rather a "gentle" put down. Dimensions: inside Ø 16mm, outside Ø 35mm, pcs ärke 10mm

The Cult-Werk headlight kit "Night Rod Style" suitable for all Harley-Davidson Breakout models from 2013 to 2017 gives the motorcycle the popular look of the Harley-Davidson< sup> Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker" will be available to you. Supplied with the look of the V-Rod / Night Rod. This must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. The following two surface variants are available for this headlight mask : - Can be painted (Minimal painting effort, because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save all the painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk fork caps suitable for all Harley-Davidson Breakout models from 2018! They cover the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! Colour: black-glossy powder-coated, scope of delivery: 2 pieces The following two Versions are available for these fork caps: - without milling (the caps are delivered in pure black) - with milling (the caps are also milled §stem logo icon supplied)

These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2018 onwards (except FXDR) with the original axle and cover them on both sides. The covers are placed over the axle and over the nut and clamped with set screws. This results in a clean and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with Delivered with frozen CWC logo) IMPORTANT INFORMATION: The axle covers are basically designed for the original setup! If a license plate holder from us is used, please leave a comment on the order completion page, because it is made with our special nut two low versions of the cover are required!

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk aluminum brake cylinder cover with milling solution suitable for all Harley-Davidson Breakout models from 2013 to the present as well as for Harley-Davidson Softail models from 2013 onwards 2018! The lid is milled from aluminum on the most modern 5-axis CNC machines and replaces the original, somewhat boring lid. Of course, it is also CNC milled on the inside, i.e. the inside of the lid corresponds to the original lid, because there are guides for the seal, which are still needed.

This "Custom" front spoiler from Cult-Werk is suitable for all Harley-Davidson Breakout models from 2013 to 2017! The spoiler is ABS Plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If grids are included, please leave a short comment on the order completion page! THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /span>

The front fender from Cult-Werk suitable for all Harley-Davidson Breakout models from 2013 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% custom-fit ABS plastic part, NOT a cheap GRP! It therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this front fender: - Can be painted (minimal painting effort - perfect Surface condition! The fender is delivered ready for painting and can basically be painted immediately!) < span>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for all Harley-Davidson Breakout models from 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the upper fork tubes between the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Assembly is very simple, the cover is simply pushed over the fork tube and screwed tight. All parts required for assembly are included in the kit!

The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

The mirror set "Radical" from Highsider in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a joint on the mirror arm for the best rear view and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handlebar head up to joint = approx. 150mm, handle length joint up to threaded bolt = 30mm Delivery includes: 2 pieces (left and right) incl. adapter pieces for fastening

The mirror set "Racing" from Highsider in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! These universal mirrors have a slightly blue-tinted mirror glass for optimal glare protection and are suitable for mounting above or below the handlebars. WITHOUT EC / ABE - not for road traffic and actually only suitable for show and racing purposes! Product specifications: head width = 125mm, head height = 62mm, handle length = approx. 140mm & M8 right-hand thread Delivery includes: 2 pieces (left and right) including adapter pieces for fastening

The Cult-Werk headlight kit "CVO Style" suitable for all Harley-Davidson Breakout models from 2013 to 2017 gives the motorcycle the popular look of the Harley-Davidson Night Rod. Unfortunately, the original Harley-Davidson Breakout headlight cannot be used in conjunction with the kit, but our LED headlight "Daymaker"< will be available to you /strong> supplied with the look of the V-Rod / Night Rod. The headlight must be soldered to the original wiring harness!! You will also receive a CNC lasered headlight bracket from us, which lowers the headlight by approx. 30 mm. This creates an even more aggressive look and makes the motorcycle appear lower and longer. The speedometer remains in the original position! You will also receive the headlight mask, which is made of high-quality ABS plastic (not GRP!!!). A perfect surface and minimal painting effort are therefore guaranteed. 100% accuracy of fit is a given. No changes to the original cables are necessary! All of the holes required for attaching the headlight kit are already present. All modifications are mounted on the original holding points, ensuring a firm and secure hold. The headlight, like the original, can be adjusted via an elongated hole in order to optimally adjust the headlight range. THE ASSEMBLY INSTRUCTIONS AS WELL AS THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>

The Cult-Werk radiator cover "Racing" is manufactured in 3D design and suitable for all Harley-Davidson Breakout models up to 2017 !This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers. Two metal brackets and all fastening material are included in the scope of delivery, with which you can Radiator cover is attached to the frame of the breakout. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 45 minutes! The following two surface variants are available for this radiator cover: - Paintable §hig (Minimal painting effort 'Äì because perfect surface quality! The cladding is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - therefore Save yourself the entire cost of painting! Remove the protective film and the cladding shines in glossy black!) THE PARTS REPORT IS IN THE "DOWNLOADS" TAB " PROVIDED!!!

The Cult-Werk radiator cover "Racing" is manufactured in 3D design and suitable for all Harley-Davidson Breakout models from 2018< /strong> as well as suitable for Harley-Davidson FXDR models from 2019 onwards! This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers. Two metal brackets and all fastening material are included in the scope of delivery, with which you can Radiator shroud is attached to the frame of the Breakout or FXDR. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 1 hour! The following two surface variants are available for this radiator cover: - Can be painted (minimal painting effort ' Äì the perfect surface condition! The cladding is delivered primed and only needs to be painted!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cladding shines in glossy black) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /strong>

The Cult-Werk front spoiler "Bobber" suitable for all Harley-Davidson Softail models from 2018 (Breakout, Fat Bob, Fat Boy, FXDR 114, Street Bob, Softail Slim, Low Rider, Standard, etc...)! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only needs to be screwed onto the supplied metal bracket. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The following two surface variants are available for this spoiler: - Painting available hig (Minimal painting effort because of perfect surface quality! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus saving Remove the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE PARTS APPROVAL WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The front fender from Cult-Werk suitable for Harley-Davidson Breakout models from 2013 onwardsgives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! The fender therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It is TOP processed, fits perfectly and makes the view better onto the front wheel. Original fit - new design. The following two surface variants are available for this front fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE "DOWNLOADS" TAB " PROVIDED!!!

Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with folding gaiters suitable for Harley-Davidson Breakout models from 2018 onwards. With this kit from Cult-Werk you can cover the fork tubes above , between and below the fork bridges. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps, 2x upper fork covers & 2x lower fork covers) - Kit with folding covers (2x fork caps, 2x upper fork covers & 2x 49mm folding covers älge)

The Cult-Werk side cover set "Racing" in two different versions (clean for airride or with cutout for damper adjustment) suitable for almost all Harley-Davidsons Softail models from 2018 onwards and of course also suitable for the FXDR 114 from 2019 onwards (on the FXDR the covers are absolutely necessary in conjunction with our rear conversion "Racing")! IMPORTANT: To mount the left side cover on the FXDR, an additional threaded retaining bracket is required to fasten the side cover √∂nen. You can find this bracket in our shop with the item number HD-UNI013 or directly here on the detail page under accessories items! These lids are an ABS plastic part and are CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! The side covers ÄûRacing‚Äú have been elaborately designed and create a cool and clean look after installation on your motorcycle! As with the original, the covers can be ordered with a cutout for damper adjustment or with a clean look for airride systems. The following two surfaces Variants of surfaces are available for this side cover set: - Can be painted (Minimal painting effort - because the surface is perfect! The side covers are delivered ready for painting and can in principle can be painted immediately!) - Glossy black (no need to be painted anymore - so you save the entire painting costs! Remove the protective film and the lids shine in glossy black!) < p>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !

Suitable for all Harley-Davidson Breakout models from 2013 to 2017. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This fork cover kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!

The belt protector from Cult-Werk is delivered in black and gives your motorcycle a cool look. Suitable for all Harley-Davidson Softail models from 2018 onwards (except FXDR!!). All bores and frä The parts are milled on state-of-the-art 5-axis CNC machining centers and then the part is powder-coated black! The belt guard gives your motorcycle a sportier and more subtle look than the original part thanks to the frozen elements.